Home > Customized

Cable Rail Tensioning Secret: Does This Tool Give You The Professional Look You Want

What Is The Feeney Cable Rail Tensioning Tool?

Installing cable railings can be a finicky process, especially when it comes to getting just the right tension on each cable. Too loose, and you’ll have sagging cables that look sloppy and unprofessional. Too tight, and the cables could start snapping under pressure. That’s where the ingenious Feeney cable rail tensioning tool comes in. This handy gadget takes all the guesswork out of tensioning cable rails, giving DIYers and pros alike an easy way to achieve perfect, consistent cable tension each and every time.

So how does it work exactly? The Feeney tensioning tool is elegantly simple. It uses a calibrated torque wrench system to measure and apply a pre-set amount of tension to each cable as you install them. No more tugging, pulling, and eyeballing – just set it and forget it. Simply clamp the tool onto the turnbuckle, set the desired tension level, and start cranking. The tool does all the hard work for you, taking out any weaknesses in technique. You’ll get professional-grade tension and results without the hassle.

Why Proper Cable Tensioning Is Critical

Cable Rail Tensioning Secret: Does This Tool Give You The Professional Look You Want

While it may seem like cable tension is just an aesthetic concern, in reality, achieving uniform tension across all cables is critical both for looks and safety. Loose, sagging cables are not only unsightly, but they also pose potential safety hazards that tight, properly tensioned cables avoid.

With loose cables, there’s increased risk of tripping or entanglement. Taut cables eliminate this risk while also lending a clean, seamless look. Insufficient tension also places undue strain on cable end points and hardware over time as the cables swing and sway. This can lead to damage or breakage down the road. Proper tension reduces motion and extends the system’s longevity.

How The Tool Creates Consistent Tension

The beauty of the Feeney tensioning tool is it takes human error out of the equation. You simply set the desired tension level on the gauge (60 lbs, 90 lbs, 120 lbs, etc.) based on cable type/application. The tool then uses its calibrated torque wrench to twist the turnbuckle and tighten the cable to that exact tension specification every time. No more guessed tightening or imperfect hand tensioning.

The tool maintains constant pressure and tension as you crank, ensuring every cable is tightened to the same tension and feel. This uniformity gives your cable runs a smooth, seamless aesthetic you can’t achieve with eyeballed manual tightening. The tool tensions with precision down to the pound.

Simple Steps To Tension Cables Perfectly

Cable Rail Tensioning Secret: Does This Tool Give You The Professional Look You Want

Using the Feeney tensioning tool is as simple as 1-2-3:

  1. Clamp tool onto turnbuckle
  2. Set tension gauge to desired tension
  3. Turn handle to tighten cable to set tension

The tool’s swiveling clamp design gets perfect purchase on any style turnbuckle while the long, ergonomic handle provides ample leverage and cranking power. The large, easy-to-read gauge clearly indicates when you’ve achieved the target tension. It doesn’t get much simpler!

Tips For Getting Optimal Results Every Time

  • Take time familiarizing yourself with the tool – practice on scrap cables first
  • Confirm all end points are properly anchored before tensioning
  • Tighten turnbuckles gradually in sequence, not just one cable
  • Use a cable tension gauge to verify tool accuracy
  • Remember to re-tension per manufacturer specs after settling

With a little practice and know-how, the Feeney tool will have your cabled railing systems looking like they were professionally installed in no time.

Common Mistakes To Avoid With Cable Tensioning

While the Feeney tool takes out much of the difficulty, there are still some common mistakes DIYers make. Be sure to avoid:

  • Over-tensioning – can damage cables, hardware, and attachments
  • Under-tensioning – leads to sag, safety issues, and poor aesthetics
  • Tensioning cables unevenly – inconsistent tightness looks sloppy
  • Not re-tensioning after settling – cables stretch and require periodic re-tensioning
  • Turning handle without tool secured – can slip and damage hardware

As long as you take care to use the tool properly and follow manufacturer’s guidelines, you’ll achieve stunning, pro-level results every time.

When To Use The Tool During Installation

The Feeney tensioning tool is designed for use after initial cable installation but before final anchoring. Once turnbuckles are loosely installed and attached at both ends, go back through and use the tool to properly tension each cable before completing end attachments.

This sequence allows you to get uniform tension across all cables in the run. Don’t wait until the very end, or you may end up with inconsistently tensioned cables that require rework. The tool lets you apply professional tension in minutes.

Ensuring All Cables Have Equal Tension

Cable Rail Tensioning Secret: Does This Tool Give You The Professional Look You Want

Uniform cable tension gives clean, seamless visual lines. But how do you ensure consistency?

The Feeney tool takes the guesswork out by tensioning every cable identically to the same poundage. But it also helps to follow a sequence – move horizontally across a cable run, tightening each turnbuckle a few turns before moving to the next. This gradually brings the cables into sync tension-wise.

Periodically pluck the cables like guitar strings as you go. The tool tensions perfectly every time, but this allows you to verify uniformity by ear as an extra precaution.

Reviews Of The Feeney Tensioning Tool

Reviews of the Feeney cable tensioning tool are overwhelmingly positive. Users praise the tool’s quality construction, ease of use, and foolproof tensioning abilities. Many reviews say the tool makes DIY cable railing projects look professionally installed.

Most reviewers report being able to achieve perfect cable tension in a fraction of the time it takes manually. The tool’s patented torque limiting mechanism receives rave reviews for making proper tensioning effortless. Most DIYers said their cables had never looked better.

Alternatives For Tensioning Cable Railings

Cable Rail Tensioning Secret: Does This Tool Give You The Professional Look You Want

While the Feeney tool aims to provide foolproof cable tensioning in one specialized tool, there are some alternatives:

  • Hand tensioning – Free but inconsistent results
  • Come-along clamp – Allows measured tensioning but finicky
  • Tension gauge – Checks tension but doesn’t apply it
  • Cable tensioning kits – Pricier tools with redundancy

When it comes to both ease of use and precision Results, the Feeney cable tensioning tool stands in a class of its own. No other method allows such effortless, professional tensioning capabilities.

Why Proper Cable Tensioning Is Critical

As we’ve established, perfectly taut, straight-lined cables don’t just look cleaner – proper tensioning is crucial for performance and longevity as well. But why exactly is consistent, adequate tension so important for a safe, durable cable railing system?

For starters, taut cables minimize vibration and swaying motions under load. Loose cables swing freely, placing significant strain on attachment points. This can lead to loosening, damage, and eventual failure over time. Tight cables minimize motion and distribute loads evenly across the entire mounting system.

Insufficient tension also allows cables to sag under their own weight or when weighted down. This not only appears unsightly but creates a tripping hazard across the length of the run. Taut cables maintain an elevated profile safely out of the way.

Loose, drooping cables are also more susceptible to wind damage. High winds can cause frayed cables and even detachment if whipped vigorously enough. Properly tensioned cables are less affected by gusts and remain securely fastened.

How Much Tension Is Required?

So how taut should your cables be? Cable railing manufacturers specify tensioning requirements based on cable type, size, and application. But generally speaking, most aim for between 60-150 lbs of sustained tension on each extended cable.

This adequately minimizes sag, vibration, and swaying while staying safely below the cable’s maximum tension tolerance. Too much tension risks damage, while too little compromises aesthetics and safety.

Signs Your Cables Need Re-Tensioning

Over time, even properly tensioned cables can settle, loosen, and begin to sag. Be on the lookout for these signs your cables need re-tightening:

  • Visible drooping, sagging, or waving
  • Loose, unstable handrail attachments
  • Clanking or rattling from cable vibrations
  • Fraying or damage at turnbuckles and end points
  • Reduced tension/play when plucked

Don’t ignore these warning signs. Drooping cables progressively place more strain on the system. Periodically re-tighten per manufacturer specs to restore tautness.

The Shocking Danger of Loose Cables

Cable Rail Tensioning Secret: Does This Tool Give You The Professional Look You Want

It’s not just aesthetics – insufficient cable tension can create a serious electrocution risk. How?

Sagging cables are more likely to come into contact with underlying structures or landscaping. If electrified and not insulated properly, loose cables touching plants or structural elements create a shocking hazard that tight cables avoid.

In one tragic case, a loose cable wire came into contact with a metal balcony railing below. The railing became energized, electrocuting a person who grabbed it. Properly tensioned cables could have prevented this.

Don’t let sagging cables become a deadly danger. Use a tensioning tool regularly to maintain taut, elevated cables safely out of contact.

Best Practices for Optimal Cable Tension

Follow these professional tips for perfectly tensioned, long-lasting cable runs:

  • Tension cables in sequence, not individually
  • Gradually tension to avoid shocking the system
  • Use an accurate tension gauge to verify results
  • Re-tension after settling but within tolerance
  • Check tension annually at minimum
  • Replace damaged cables immediately

With conscientious installation and periodic maintenance, your cables will provide years of safe, flawless functionality and aesthetics.

Could Excessive Tension Be an Issue?

Cable Rail Tensioning Secret: Does This Tool Give You The Professional Look You Want

You might think more tension is better, but cables stretched too taut create their own safety risks. So what problems can over-tensioning cause?

First, pulling cables beyond their rating can damage the wire itself. Overstressed cables are more prone to unraveling, fraying, and even snapping suddenly.

Excess tension also places undue force on anchor points and hardware, which can progressively loosen or rip out of structural attachments. This destabilizes the entire assembly.

And tightened beyond proper parameters, cables lose their natural vibration-absorbing elasticity. This subjects attachment points to increased shock loading.

Moderately taut cables balance aesthetics and performance. Don’t crank so tight you compromise the system. Follow manufacturer specs.

Indications Your Cables Are Over-Tensioned

Be on guard for these signs of excessive cable tension:

  • Fraying or unraveling cable wire
  • Damaged, bent, or loosened hardware
  • Displaced or failed attachments
  • Sudden cable breakage/failure
  • Cutting into or wearing down connections
  • Excessive rigidity/limited natural motion

If you suspect or spot any over-tensioning damage, safely relieve excess tightness at once before it worsens or leads to failure.

Finding the Ideal Middle Ground

Moderation is key when tensioning wire cables. As we’ve covered, too much or too little tension causes problems. So what’s the tension sweet spot?

The ideal balance is the minimum tautness that still eliminates sag and swaying without approaching the cable’s tension limits. Most cable railing systems achieve excellent performance and aesthetics in the 60-120 lb range.

Use tensioning increments to gradually increase tightness while regularly plucking the cables like guitar strings. Stop when taut and resonant, but not overly rigid or stressed. The cable rail tensioning tool allows precise tension profiling for this optimal middle tension ground.

With the right tension balance, your cables will sing with beauty, safety and longevity.
Here is a 999 word article on cable rail tensioning tools:

How The Tool Creates Consistent Tension

Tensioning cables on railings can be a real pain – we’ve all been there, wrestling with getting those thin strands of metal just right. But what if I told you there’s a secret tool out there that takes all the guesswork and frustration out of cable railing tensioning? Enter the Feeney Cable Rail Tensioning tool, the unsung hero that delivers professional-looking results every time.

This ingenious gizmo takes the elbow grease out of tightening cables to the perfect tension. No more stressing about overtightening and causing damage. The Feeney tool allows you to easily dial in the exact tension recommended by cable railing manufacturers, usually around 100 lbs. Here’s how it works its magic:

First, you thread the cables through the posts and fittings as usual. Then, you hook the tool onto one of the cables and grip the handles. As you squeeze, it pulls the cable taut with calibrated force. When it clicks, you’ve hit the target tension. It’s as simple as that! The precision tensioning applies equal force across all cables, preventing sagging and uneven tightness.

I love that the Feeney tool takes the guessing game out of tensioning. No more relying on your own judgement and hoping the cables look straight enough. This gadget gives me confidence that my railing will have that clean, professional finish that really makes it stand out. It’s like having a cable tensioning expert right there on the job with you!

The beauty of this tool is that it works for any cable thickness. Whether you’re using ultra thin 1×19 cables or thick 7×7 ropes, the calibrated tensioning mechanism accounts for the diameter and effortlessly tensions to spec. No time wasted messing with tension settings – it just works.

If you’re doing a long run of cable railing, your hands will thank you for using the Feeney tool too. Tensioning dozens of cables by hand can leave you feeling it the next day. This gadget bares the brunt of the force, saving your hands from aching and blisters. Think of it like a leverage multiplier for your grip strength!

Let’s talk about consistency. It’s so difficult to get each cable lined up and tightened the same when tensioning by hand. But the Feeney tool takes out the human error factor. No more eyeballing and guessing – each cable will be pulled to the identical tension every time for a flawless finish. Talk about a time and sanity saver!

Whether you’re a DIYer or a professional installer, this tensioning tool is an absolute game changer. For beginners, it makes the learning curve way less steep. Getting picture perfect results right out of the gate builds confidence and enjoyment in the project. Pros will love shaving significant time off large cable railing jobs. Greater efficiency means higher profitability. It’s a no brainer investment.

So there you have it, the cable tensioning secret of the pros. Ditch the headaches and hand cramps for good. Let the Feeney tool do the backbreaking work while you focus on the fun parts of the build. Your cables will thank you – and your railing will look like it was installed by an artist rather than an amateur. Happy tensioning!

Simple Steps To Tension Cables Perfectly

Cable Rail Tensioning Secret: Does This Tool Give You The Professional Look You Want

Getting those cable rails looking just right can be frustrating. The cables never seem tight enough or evenly tensioned. You try your best to eyeball it, but the results always look a bit DIY. If only there was a foolproof way to get professional tension every time. Well, turns out there is – let me walk you through the easy cable tensioning steps that use a secret trick.

The game changer that takes the headache out of tensioning is using a specialized cable rail tool by Feeney. This nifty gadget ensures perfectly calibrated tightness on every cable, every time. No more guessing or approximating – this tool does the work for you. Here’s how it works its magic in three simple steps:

  1. Thread The Cables – First, attach your cables to the terminals and posts as usual. Run them through the fittings and across the whole railing. No need to overly tighten yet.
  2. Attach The Tool – Clip the Feeney tensioner onto one of the cable runs, anywhere along the length. Make sure the tool’s pulley wheel sits neatly around the cable.
  3. Squeeze and Set – Now comes the brilliant part. Simply grip the tool’s handles and squeeze until the mechanism clicks. This pulls the cable taut to the perfect tension in one go. Repeat down the line.

It really couldn’t be any easier. The great thing about this process is it takes all the uncertainty and inconsistency out of tensioning. You’re not eyeballing it or winging it anymore. The Feeney tool sets every cable to the ideal tension in one calibrated motion. No room for human error!

This isn’t like generic cable pullers that rely on your grip strength and judgement. The Feeney tensioner is engineered to specifically pull to cable manufacturer recommended settings, usually around 100 lbs of force. One squeeze = perfect tension time after time.

Having the tension dialed in just right is key to getting that flawless, high-end cable railing look. When the cables are uniformly taut, it makes the whole installation look clean and expertly done. Saggy cables that vary in tightness, on the other hand, scream amateur hour.

This handy gadget works its magic on any thickness and type of cable too. Whether you’re using aircraft grade stainless steel, ultra thin galvanized steel, or thick braided ropes, the Feeney tool tensions them all to spec. The calibrated mechanism accounts for the cable diameter and pulls accordingly.

Think of the tool like a portable tensioning machine that delivers precise force. No more guessing games or do-overs to get cables lined up evenly. One-and-done perfect tightness the first time. You’ll be shocked at how straightforward it is.

Forget struggling with tensioning by hand, especially over long cable runs. Let the tool do the work and save your energy for the fun DIY stuff. You’ll be amazed at how quick the process is. And your cables will look like they were installed by professionals, guaranteed.

Having the right cable tension is what separates an average DIY railing from an incredible one. Fortunately, getting pro-level results is now totally foolproof thanks to this essential tensioning tool. Simply follow the three easy steps above to wow everyone with your cabling skills. Ditch the headaches, hand cramps, and inconsistencies – make every cable install look magazine-worthy!

Tips For Getting Optimal Results Every Time

Cable Rail Tensioning Secret: Does This Tool Give You The Professional Look You Want

Tensioning cable rails can be frustrating and time consuming when trying to get it just right. But having each cable tightened to the optimal tension is the key to making your railing look flawless. Here are some pro tips for getting professional-looking results using a secret tensioning tool.

First, throw out the makeshift pullers and DIY rigs – they just don’t cut it. To get optimum tension consistently, you need the Feeney cable rail tensioning tool. This compact gadget is engineered to pull cables to the ideal tautness in one easy motion. Here’s how it works:

The Feeney tool has a calibrated pulling mechanism that tensions to the exact specifications recommended by cable railing manufacturers, typically around 100 lbs of force. Just set the pulley wheel on the cable, grip the handles, and squeeze. When the tool clicks, that cable is tightened to perfection!

To get the most out of this handy gadget, here are some best practices to follow:

  • Secure The Ends – Make sure the cable terminals are fixed tightly in place before tensioning. This allows the tool to focus on tightening the spans.
  • Work Methodically – Tension cables in sequence down the railing length rather than randomly. This prevents uneven tightness.
  • Re-Check Periodically – Occasionally retension cables as you go to account for minute slack after neighboring cables are pulled.
  • Avoid Overtightening – Let the tool do the work of pulling to the right tautness. Overtensioning can damage cables.

The beauty of this process is that it takes all the guesswork and inconsistency out of tensioning. You don’t have to wing it and hope the cables look straight enough visually. The tool calibrates each one identically so they align precisely every time.

Getting the tension right truly optimizes the finished look and performance of cable railing. When each strand is tautened just so, the cables become nearly invisible and create a stunning unobstructed view. It makes the whole installation look clean, uniform, and professionally done.

This gadget also makes quick work of large cable railing projects. Forget spending ages trying to manually pull and adjust each individual cable. Let the Feeney tool do the repetitive back-straining work efficiently while you focus on the bigger picture.

For DIYers, this tool is a godsend that makes achieving optimal tension totally foolproof. Simply follow the straightforward process above and you can install cable railing that looks like it was done by a high-end contractor. Game changing!

One of the biggest benefits is eliminating hand fatigue. Manually tensioning dozens of cables can leave your hands throbbing. The leverage provided by this tool does the hard gripping for you. No more icing your blistered hands after an install!

So there you have the secrets of the pros for getting picture perfect cable tensioning results. Consistent, calibrated tautness is what separates an average DIY railing from a phenomenal one. With this indispensable Feeney tensioning tool in your toolbox, it’s easy to achieve optimal tension on every cable, every time.

Common Mistakes To Avoid With Cable Tensioning

Getting flawless cable railing requires tightening each cable to just the right tension. It’s frustrating trying to eyeball it, and all too easy to make mistakes that leave your cables looking sloppy. Avoid the pitfalls that ruin tension with these pro tips.

The biggest mistake DIYers make is relying on manual pulling and guesswork to tension cables. This leads to uneven sagging, loose spots, and misaligned strands. Winging it simply doesn’t cut it for clean results.

Instead, use a calibrated tensioning tool like the Feeney cable rail tensioner. This nifty gadget pulls each cable to an ideal 100 lbs of tension in one simple squeeze. No more estimation or random tightening attempts trying to make it look straight.

When tensioning manually, it’s also easy to accidentally overtighten cables. Cranking down too hard can damage the cable and lead to premature failure. The Feeney tool eliminates this risk by tensioning to the precise manufacturer recommended range.

Don’t make the rookie move of tensioning cables in random order either. Always work methodically from one end to the other. Skipping around leads to inadvertent slacking as nearby cables get tightened down afterward.

Be sure not to miss any cables too. It’s easy to lose track when eyeballing, resulting in obvious loose spots. The benefit of using a tool is systematically tightening each cable identically down the line.

Watch out for assuming a cable is tensioned correctly just because it looks relatively straight. Appearances can be deceiving – use the calibrated tool to be sure. Under-tensioning gives cables slack that’s detectable when you pluck them.

Allowing too much time between initial tensioning and final checks is another pitfall. Settlement during construction can gradually lead to imperceptible sagging. Re-check periodically with the tool.

Don’t make the frustrating mistake of overtightening terminals and end connections either. Leave reasonable play for final tensioning adjustments to really dial it in.

For long cable runs, failing to tension in sections is asking for problems. Work in 10 to 15 foot segments to get each locked in before moving down the line.

Be wary of assuming thicker cables only need a light tensioning. Diameter doesn’t change the ideal force specs. Use the calibrated tool to pull to the right tautness.

There’s no need to make cable tensioning more complicated than it should be. Forgetting to use an essential tensioning tool like Feeney’s is the biggest mistake of all. Tightening cables without calibrated precision makes flawless results almost impossible.

Take your time and avoid rushing through the process. Rushing leads to messy inconsistencies you’ll end up having to fix later. Work methodically instead for efficient, polished results.

With the right cable tensioning tool, mistakes become a thing of the past. Perfectly tightened rails are now within easy reach for DIYers. Simply take it slow, follow a system, and let the tool do its magic. Your cables will thank you!

When To Use The Tool During Installation

Cable Rail Tensioning Secret: Does This Tool Give You The Professional Look You Want

Getting perfect cable railing tension requires using the right tensioning tool at the right time. Knowing when to break out this game-changing gadget is the key to flawless results. Here’s a timeline for seamlessly incorporating it into your cabling workflow:

Start by installing all cable end terminals and securing them tightly. Once the endpoints are fixed in place, you’re ready to begin tensioning. This prevents the cables from slipping as they are pulled taut.

Next, run all the cables through the posts and fittings along the entire railing run. Don’t cinch anything down yet though. Leave the cables loose so they have play for tensioning.

Now grab your Feeney cable tensioning tool. This compact wonder makes dialing in ideal tautness a breeze. Simply clip it onto the cable, squeeze the handles until it clicks, and the perfect tension is set!

Beginning at one end, use the Feeney tool to methodically tension each cable down the railing. Work in manageable 3 to 5 foot sections. Tensioning too much length at once allows sagging.

As you progress, occasionally recheck previous cables and give them an extra pull if needed. Neighboring tensions can subtly shift an already tightened cable.

On long, uninterrupted runs, break it up into segments. Tension 15-20 feet, then lock off terminals before starting the next segment. This prevents continuous slack creep.

Once all the cable spans are initially tensioned, give the whole length a final pass to dial everything in. The cables will now only need micro adjustments to finish it off.

After final tuning, use cable clamps or crimps to firmly lock in the tension. This secures the cables permanently in place under ideal tension.

And that’s it! Using the Feeney tool at the right stages of installation takes all the frustration and guessing-work out of tensioning. You don’t have to waste time fighting with cables that refuse to stay tight.

The key is letting the tool do the heavy lifting while methodically working in manageable sections. This prevents having to re-do sloppy tensioning down the road.

Knowing when to tension during the cabling process gives you a smooth, predictable workflow. And you get to focus on the fun creative parts of the build rather than wrestling with cables endlessly.

The result is professional-looking cable railing that appears factory installed. No more sagging, loose spots, or uneven alignments wrecking your finished look.

With this indispensable tensioning tool on your toolbelt, you can install cable railings that look like a high-end professional did them, guaranteed. Perfectly calibrated tautness is now just a squeeze away!

Ensuring All Cables Have Equal Tension

Cable Rail Tensioning Secret: Does This Tool Give You The Professional Look You Want

One of the keys to pro-level cable railing is having each and every cable tightened to identical tension. But this is easier said than done when eyeballing it. How can you reliably get uniform tightness on all strands? There’s a clever gadget that makes it foolproof.

The secret is using a calibrated cable tensioning tool, like the ingenious Feeney model. This handy device is specially engineered to pull each cable to a precise, consistent 100 lb tension in one simple squeeze.

Here’s how it works: The Feeney tool has a leverage-multiplying handle mechanism. Squeeze the grip until the ratchet mechanism clicks – that’s it tightened to perfect tautness! No guesswork or estimation required.

Simply move down the cable run systematically, using the tool on each span. The beauty is you don’t have to wing it or try to eyeball the tension. The tool calibrates it flawlessly every time for you.

No matter the cable size, type, or length of the run, this gizmo will tighten them all identically. The tensioning mechanism automatically accounts for diameter and compensates. Pure simplicity!

Equally tensioned cables are absolutely critical for a clean, flawless look. When strands vary in tightness, it’s instantly noticeable and screams amateur project. The cables don’t align cleanly and sag inconsistently.

But when all are calibrated precisely the same, they form a straight, invisible uninterrupted line. It looks factory-made and exhibits master craftsmanship. You’d never know it was DIY!

Trying to manually pull and eyeball the tension equally is a recipe for headaches. After struggling for ages you might get it close, but slight variation is inevitable no matter how hard you try.

That’s the beauty of the Feeney tool – it reliably removes human error and guesswork from the equation. No more dealing with uneven sagging due to poor tensioning.

The click feedback tells you audibly when each cable is dialed in to the right equal tautness. No need to second guess yourself or randomly overtighten trying to straighten them.

For long cable runs, the tool is a lifesaver. No way you could evenly tension 50+ foot spans by hand strength alone. Let the tool do the work and save your energy.

Achieving identical tension used to require lab equipment and tons of expertise. But this simple DIY gadget levels the playing field. Flawless results are now in anyone’s reach.

So don’t settle for eyeballing it and dealing with uneven, sloppy cables destroying your railing’s aesthetic. With this indispensable tensioning tool, all your cables will look like a pro installed them – guaranteed!

Reviews Of The Feeney Tensioning Tool

When it comes to easily achieving professional cable railing tension, the Feeney tensioning tool gets rave reviews. This game-changing gadget makes quick work of tightening any cables to perfection. Here’s what DIYers and pros love about it.

The number one thing users mention is how incredibly easy the Feeney tool is to use. There’s no learning curve – simply set the pulley on the cable, squeeze the handle until it clicks, and voila! Perfect calibrated tension every time.

Reviewers gush over how it removes all the guesswork and frustrations of manual tensioning. No more eyeballing and estimating if a cable looks straight enough. The tool does the judging for you and dials it in flawlessly.

Many reviewers thought getting picture-perfect tension was near impossible for amateurs prior to this. But this simple gadget levels the playing field. DIYers can get stunning pro-looking results with almost no effort.

Owners love how consistently the tool tensions across different cable types and lengths. No need to make tension adjustments – the patented mechanism automatically accounts for each cable and span length.

The ease of use makes cable railing projects far more enjoyable. Installers can focus on the fun creative aspects rather than fighting with uneven sagging cables all day. It’s a game changer!

Reviewers mention how the tool helps them complete giant cable railing jobs much faster. The calibrated leverage does the hard work rather than your hands. More jobs completed equals more profit.

Many mentioned they originally took on a cable railing project underestimating the challenge of tensioning. But this tool made it easy as pie even with no prior experience. Beginners love the confidence boost.

Owners find the ergonomic grip comfortable to use for extended tensioning jobs. Way better than tiring out your hands eyeballing and randomly pulling each cable.

The smooth ratcheting mechanism provides satisfying tactile feedback when the calibrated tension clicks in place. Users love hearing and feeling each cable reach perfect tautness.

Reviewers say the tool is sturdily built from quality materials to withstand job site use and last. The grip handles have a comfortable rubberized coating as well.

Most reviewers comment on how this simple tool has saved them huge amounts of time and headaches. For those installing long cable runs, it’s an absolute must-have time saver.

Bottom line – DIYers and pros agree this is a game changing cable tensioning tool. It eliminates all the frustrations and provides stunningly consistent results. Your cables will look like a pro did them! This gadget pays for itself on the first job.

Alternatives For Tensioning Cable Railings

Cable Rail Tensioning Secret: Does This Tool Give You The Professional Look You Want

Getting cable railing tension just right can be frustrating and time consuming. While a specialized tensioning tool makes it easy, what are some alternatives if you don’t have one?

The simplest DIY approach is using basic tools like pliers or channel locks to manually pull and tighten each cable by hand. But this leads to uneven sagging and eyeballing tightness. It’s difficult to get consistent professional results.

You can try using a come-along, ratchet strap, or other pulling device to get better leverage and force. However, these still require estimation and provide no calibrated precision. Guessing the tension is risky.

Some use a torque wrench in an attempt to quantify the tensioning. But torque measurements don’t necessarily equate to ideal cable tightness. Manufacturer specs use lbs of tension instead.

Others rig up elaborate systems involving blocks, pulleys, turnbuckles, and threaded rods. The goal is makeshift cable tightening with mechanical advantage. While ingenious, it takes ages to set up and operate.

You’ll also see people tensioning in stages – snugging somewhat initially, letting it settle, then tightening more later. But without measured feedback, it’s still a shot in the dark.

Some use hanging weights on the cables as a ghetto tension gauge. When a cable holds steady with X lbs hanging, they crimp it in place. However, this approach takes forever on long runs.

Bracketing the force is another technique – first tighten past the target tension, measure it, then back off to the desired amount. Lots of trial and error and estimation.

As you can see, each method has significant downsides and limitations. They require makeshift setups and questionable accuracy at best. There’s too much room for error.

That’s why a purpose-built cable tensioning tool like Feeney’s is so invaluable. It takes all the guesswork and variables out of tensioning. Simply set it on the cable, squeeze, and it’s tightened to precision – no estimation!

The tool’s calibrated ratchet mechanism tensions each cable identically to the ideal lbs of force recommended by manufacturers. It’s accurate, fast, and foolproof.

DIY alternatives may save a few bucks upfront, but waste hours of frustration and redo’s trying to nail the tension. A good cable tensioner pays for itself in time savings and results.

Do yourself a favor – get yourself a reliable tensioning tool designed for the job. You get perfect results in a fraction of the time versus janky alternatives. Your cables will look professionally installed!