Home > Customized

Can Bissell’s Proheat Models Easily Get Your Floors Sparkling Clean: How to Maximize Your Bissell Cleaner For Deeper Cleans

When it comes to keeping your floors looking their best, Bissell’s Proheat floor cleaners are top-notch. With powerful spray jets, dual water tanks, and built-in brush rolls, these machines can tackle even the toughest messes. But with two great Proheat models to choose from – the CrossWave and the PowerBrush – how do you know which is right for your home?

Choosing Between the CrossWave and PowerBrush Proheat Models

The main difference between the CrossWave and PowerBrush is that the CrossWave is an all-in-one vacuum and wash machine, while the PowerBrush focuses solely on washing carpets and rugs. Here’s a quick rundown of each:

  • CrossWave – vacuums and washes hard floors in one step, also cleans area rugs
  • PowerBrush – deep cleans carpets and rugs only

So if you have a mix of hard floors and carpets, the CrossWave is likely the better choice. It can handle both surfaces. But if you mainly need to revive carpets, go for the PowerBrush.

Getting to Know the Features of Each Model

Can Bissell

Now let’s dive into the key features of the CrossWave and PowerBrush models:

  • Dual-action brush roll loosens, lifts and removes dried messes
  • Multi-surface cleaning – carpets, rugs, sealed hard floors, tile, laminate, etc.
  • Separate tanks for clean and dirty water
  • Automatic self-cleaning cycle
  • Removable brushes for periodic cleaning
  • Rotating DirtLifter Powerbrushes lift embedded dirt
  • Heated cleaning formula and water maintain optimal temperature
  • Antibacterial system kills germs and bacteria
  • Deep carpet cleaning on forward and backward passes
  • Removable Nozzle for cleaning tight spaces

As you can see, both models are packed with features to deliver a thorough clean, just tailored to different surface types.

Tips for Proper Maintenance and Care

To keep your Bissell Proheat machine working its best, be sure to:

  • Empty the dirty water tank after each use
  • Rinse and air dry the brushes periodically
  • Use genuine Bissell formulas in the clean water tank
  • Check filters and belts for damage, replace as needed
  • Unclog spray tips using a paperclip if they get blocked
  • Use the self-cleaning cycle monthly

With regular maintenance, your Proheat cleaner should deliver years of spotless floors.

Understanding How the Dual Water Tanks Work

Can Bissell

The separate clean and dirty water tanks are one of the key features that set Proheat models apart. Here’s how they work:

  • Fill clean tank with hot tap water and cleaning formula
  • As you clean, the solution is sprayed onto the floor surface
  • Powerful suction extracts the dirt and cleaning solution
  • Extracted dirty water goes into the separate dirty tank for disposal

This keeps the clean and dirty water separate, improving cleaning efficiency. Just empty and rinse the dirty tank when finished.

Making the Most of the Built-In Brushrolls

The spinning brushrolls on Proheat models provide thescrubbing action needed to loosen up stuck-on messes. Some tips:

  • Adjust brush speed depending on floor type
  • For carpets, use high speed for deep cleaning
  • On hard floors, use lower speed to avoid splashing
  • Check brushes regularly for tangled hair and debris
  • Rinse brushes to keep them debris-free

Optimizing brush speed for each cleaning job will give you the best results.

Customizing Cleaning Settings for Different Floor Types

With multiple settings available, you can tailor the Proheat’s performance to specific cleaning tasks:

  • Area rugs – Use surface scrub mode for lighter cleaning
  • Carpets – Turn on deep carpet mode for stubborn stains
  • Hard floors – Switch to hard floor setting with brushes off
  • High traffic areas – Use max cleaning mode for heavy soiling

Choosing the right setting prevents over-wetting and delivers a customized clean.

Using the Right Cleaning Formula and Water Ratio

Always use Bissell formulas in your Proheat cleaner and follow the instructions for the correct water-to-formula ratio. This helps:

  • Boost cleaning effectiveness
  • Maintain optimal pH balance
  • Prevent mineral deposits and scale build-up
  • Reduce foam and maximize suction

Check your formula bottle for the recommended amount per tankful.

Maximizing Pet Hair and Allergen Removal

Can Bissell

Pet dander, pollen, and dust mite allergens can collect deep in carpets and rugs. To maximize removal:

  • Use hot tap water to optimize cleaning solution effectiveness
  • Make multiple forward and backward passes over heavily soiled areas
  • Use deep cleaning or max mode for high-traffic zones
  • Check brushes and nozzle for tangled pet hair
  • Change filters regularly to trap allergens

Thorough cleaning and maintained filters promote a fresher, allergen-free home.

Sanitizing and Deodorizing with the Antibacterial System

The PowerBrush Proheat includes an antibacterial system that kills germs and bacteria as you clean. Benefits include:

  • Attacks germs using heat and cleaning formula
  • Reduces mold and bacteria growth in carpets
  • Eliminates odors trapped in fibers
  • Creates a more sanitary home environment

The hot water and antibacterial agent leave carpets clean and help prevent future bacteria growth.

Troubleshooting Common Issues and Problems

Can Bissell

While Bissell Proheats are designed for reliability, occasional issues can arise. If you notice:

  • Reduced spray from nozzles – clean spray tips with a paperclip
  • Floors not drying quickly – empty dirty tank before it’s full
  • Machine won’t spray – check formula is added to clean tank
  • Brushes won’t spin – remove debris or hair wrap

Quick troubleshooting keeps your Proheat running smoothly.

Bissell’s Proheat floor cleaners pack some impressive features to deliver superior cleaning performance. The two leading models, the CrossWave and PowerBrush, each have their own set of standout features tailored to tackle different cleaning needs.

Getting to Know the Features of Each Model

Understanding the key features of the CrossWave and PowerBrush allows you to select the model best suited to your floors and cleaning requirements.

CrossWave Features:

As an all-in-one vacuum and wash system for hard floors, the CrossWave boasts features like:

  • A dual-action brush roll that simultaneously vacuums and washes.
  • The ability to clean sealed hard floors, area rugs, tile, laminate and more.
  • Separate clean and dirty water tanks to keep the cleaning solution uncontaminated.
  • Removable brushes that can be periodically cleaned to maintain performance.
  • An automated self-cleaning cycle to flush out dirt and debris.

With these capabilities, the CrossWave delivers a sparkling clean floor in one wet/dry pass.

PowerBrush Features:

The PowerBrush stands out with advanced features engineered for deep cleaning carpets and rugs, like:

  • DirtLifter PowerBrushes that draw out embedded dirt and stains.
  • A heated cleaning system that maintains optimal water temperature.
  • An antibacterial agent that kills germs and bacteria as it cleans.
  • The ability to make forward and backward passes over high traffic areas.
  • A removable hand tool nozzle for cleaning corners and crevices.

These features let the PowerBrush revive carpets and rugs to a like-new condition.

While the CrossWave and PowerBrush take different approaches to floor care, they both provide advanced cleaning technologies tailored to their specific purposes. Understanding the capabilities of each model makes it easier to pick the Proheat cleaner that’s just right for your home.

Tips for Proper Maintenance and Care

To ensure your Bissell Proheat cleaner continues delivering optimal results over time, follow these tips for proper maintenance and care:

  • Empty and rinse out the dirty water tank after each use to prevent growth of mold and bacteria.
  • Periodically deep clean the brush rolls and nozzles to remove tangled debris, hair, and accumulated dirt particles.
  • Only use genuine Bissell cleaning formulas in the clean water tank to prevent mineral deposits and maximize cleaning effectiveness.
  • Check and replace filters as needed to maintain strong suction power.
  • Unclog spray tips using a straightened paper clip if they become blocked.
  • Use the self-cleaning cycle monthly to flush out internal components.

With regular care as outlined in the owner’s manual, a Bissell Proheat cleaner should deliver years of outstanding performance and pristine floors.

Understanding How the Dual Water Tanks Work

Can Bissell

The separate clean and dirty water tanks are a key feature that enables the superior cleaning abilities of the Bissell Proheat models. Here’s an overview of how they work:

  • The clean water tank is filled with hot tap water and the appropriate amount of Bissell cleaning formula as specified on the bottle.
  • As you clean, this solution is sprayed onto the floor surface and activated by the spinning brushes.
  • Powerful suction then extracts the dirtied water and formula, depositing it into the dirty water tank.
  • The dirty tank keeps all this contaminated liquid separate from the clean solution, allowing continuous cleaning with a fresh solution.

When finished cleaning, simply empty and rinse out the dirty tank before your next use. This dual tank system optimizes cleaning performance.

Making the Most of the Built-In Brushrolls

The spinning brushrolls built into Bissell Proheat models provide the agitation required to loosen up stubborn dirt, stains, and debris. Here are some tips for maximizing their effectiveness:

  • Adjust the brush speed setting based on the floor type, using high speed for carpets and lower speeds for hard floors.
  • Check the brushes frequently for tangled strands of hair and threads which can inhibit rotation.
  • Rinse away any debris or dirt clumps from brushes after each use.
  • Replace brushes promptly at the first signs of wear to maintain optimal cleaning power.

By tailoring brush speed to the floor type and keeping the brushes free of tangles and buildup, you’ll get superior cleaning results with the built-in brushrolls.

Customizing Cleaning Settings for Different Floor Types

Can Bissell

Being able to customize cleaning settings is a key benefit of the Bissell Proheat models. You can tailor the performance to specific cleaning jobs:

  • For area rugs, use the surface scrub mode for gentle but effective cleaning.
  • On carpets, engage the max cleaning or deep carpet mode to tackle ground-in dirt and stains.
  • For sealed hard floors, switch to the hard floor setting and turn brushes off to avoid scuffing.
  • In high traffic zones, max cleaning mode provides extra passes for heavily soiled areas.

Choosing the right setting helps prevent over-wetting different floor types while still delivering a thorough clean.

Using the Right Cleaning Formula and Water Ratio

Always filling the clean water tank with the recommended ratio of hot tap water and Bissell cleaning formula is key. This helps:

  • Boost the effectiveness of the formula.
  • Maintain the optimal pH balance for cleaning.
  • Prevent mineral scale build-up in the internal components.
  • Reduce sudsing and foaming for unimpeded suction power.

Be sure to consult your formula bottle for the correct amount per tankful of water.

[Article continues with additional headers and detailed paragraphs…]

Bissell’s CrossWave and PowerBrush Proheat cleaners use advanced technologies to deep clean floors. But keeping your machine working optimally requires performing regular maintenance.

Tips for Proper Maintenance and Care

Your Bissell Proheat cleaner is a significant investment designed to provide years of spotless floors. Follow these tips to keep it running like new:

  • Always empty the dirty tank after each use. This prevents dirt, debris and moisture from accumulating inside the machine where it can lead to odor and bacterial growth.
  • Occasionally deep clean the brushes by removing them and rinsing under running water. This removes any tangled hair, stuck-on dirt clumps and cleaning residue.
  • Only use Bissell brand cleaning formulas in the clean water tank. Generic cleaners may not optimize pH balance and can cause mineral deposits to form.
  • Check the filters monthly and replace them if they appear overly dirty or are torn. Clogged filters reduce suction power.
  • Use a straightened paperclip to unclog the spray nozzles if you notice reduced spray. This keeps the flow strong.
  • Run the self-cleaning cycle monthly to flush out internal components and hoses.

Adhering to the maintenance schedule recommended in the user manual helps prevent problems down the road and ensures your investment continues delivering spotless floors for years before requiring service.

Understanding How the Dual Water Tanks Work

Can Bissell

The separate clean and dirty water tanks are a standout feature of Bissell’s Proheat models. Here’s an overview of how this dual tank system works:

  • First, fill the clean water tank with hot tap water and the appropriate amount of Bissell formula as specified on the bottle.
  • As you clean, this solution gets sprayed onto the floor surface and worked in by the brush rolls.
  • Powerful suction then extracts the dirtied water/formula mixture into the dirty water tank.
  • Keeping the clean and dirty water separate optimizes cleaning performance and solution usage.

Simply empty, rinse and air dry the dirty tank after each use. The dual tank design helps the Proheat models deliver a superior clean.

Making the Most of the Built-In Brushrolls

The spinning brushrolls in Bissell’s Proheat cleaners provide the scrubbing action needed to loosen up dried-on messes. Here’s how to maximize their cleaning abilities:

  • Adjust brush speed up for carpets or down for hard floors to avoid splashing and scuffing.
  • Frequently check brushes and remove tangled strands of hair or threads.
  • Rinse away debris under running water after each use.
  • Replace worn brushes to maintain optimal agitation.

Customizing brush speed for the floor type while keeping brushes free of buildup ensures you get superior cleaning results.

Customizing Cleaning Settings for Different Floor Types

Can Bissell

With their various cleaning modes, Bissell Proheats allow you to tailor the performance for specific cleaning tasks:

  • Area rugs can be lightly cleaned using the surface scrub setting.
  • Engage deep carpet mode for high-traffic zones or stubborn stains.
  • The hard floor setting prevents scuffing delicate sealed floors.
  • Max mode provides extra passes for heavily soiled high traffic areas.

Choosing the right setting helps prevent over-wetting while still delivering customized cleaning.

[Article continues with additional headers and detailed paragraphs…]

Bissell’s Proheat cleaners stand out from the competition thanks to their innovative dual water tank system. Understanding how these separate clean and dirty tanks work is key to maximizing cleaning performance.

Understanding How the Dual Water Tanks Work

The separate clean and dirty water tanks are a defining feature of Bissell’s CrossWave and PowerBrush Proheat models. Here’s an overview of how this system functions:

  • First, fill the clean water tank with hot tap water and add the appropriate amount of Bissell cleaning formula as specified on the bottle.
  • As you clean, this fresh water/formula solution gets sprayed onto the floor surface through small jets.
  • Powerful suction immediately extracts the dirtied water and formula mixture back into the machine.
  • This dirty liquid gets deposited into the separate and distinct dirty water tank.
  • The clean and dirty water remain isolated, optimizing cleaning performance.

Once finished cleaning, simply empty, rinse and air dry the dirty water tank. This keeps the internal components free of residual dirt, bacteria, and odors. The dual tank design is a key advantage of the Proheat models.

Making the Most of the Built-In Brushrolls

The spinning brushrolls inside the Bissell Proheats provide the scrubbing power needed to loosen up dried-on messes. Follow these tips to maximize their effectiveness:

  • Adjust brush speed up for carpets or down for hard floors to prevent splashing and scuffing.
  • Frequently check for and remove strands of tangled hair or threads.
  • Give brushes a quick rinse after each use to prevent buildup of dirt and debris clumps.
  • Replace worn bristles promptly to maintain optimal cleaning performance.

Customizing brush speed while keeping brushes debris-free lets you get the deepest clean possible on any floor type.

Customizing Cleaning Settings for Different Floor Types

The various cleaning modes on Bissell Proheats allow you to tailor the performance to specific cleaning tasks:

  • For area rugs, the surface scrub setting provides a lighter clean.
  • Engage max cleaning or deep carpet mode for high traffic zones.
  • The hard floor setting prevents scuffing of delicate sealed floors.
  • Max mode makes extra passes in heavily soiled areas.

Choosing the right preset cleaning mode prevents over-wetting while still delivering customized cleaning.

Using the Right Cleaning Formula and Water Ratio

Can Bissell

Always filling the clean water tank with the recommended ratio of hot tap water and Bissell formula is key. This helps:

  • Boost the effectiveness of the formula.
  • Maintain the optimal pH balance for cleaning.
  • Prevent mineral scale build-up in components.
  • Reduce sudsing for unimpeded suction.

[Article continues with additional headers and detailed paragraphs…]

The built-in brushrolls on Bissell’s Proheat models provide the scrubbing action needed to loosen up dried-on messes and ground-in dirt. Optimizing their performance is key to getting that deeper clean.

Making the Most of the Built-In Brushrolls

The spinning brushrolls inside Bissell’s CrossWave and PowerBrush Proheat cleaners deliver essential agitation to carpets and hard floors. Follow these tips to maximize their cleaning abilities:

  • Adjust the brush speed setting up for carpets, or dial it down for hard floors. High speeds can cause splashing and scuffing on delicate floors.
  • Frequently check the brushes for tangled hair, strings, threads, etc. These can wrap around the brush and inhibit rotation.
  • Give brushes a quick rinse under running water after each use. This prevents buildup of dirt clumps, debris and cleaning residues.
  • Replace worn or damaged bristles promptly. Worn brushes can’t scrub as effectively.

Customizing the brush speed for floor type while keeping brushes debris-free allows you to get the deepest clean on any surface.

Understanding How the Dual Water Tanks Work

Can Bissell

The separate clean and dirty water tanks are a defining feature of Bissell’s Proheat models. Here’s how this system functions:

  • Fill the clean tank with hot tap water and add the appropriate amount of Bissell cleaner.
  • This solution gets sprayed onto floors through small jets during cleaning.
  • Powerful suction immediately extracts the dirtied water/formula back into the machine.
  • The dirty liquid gets deposited into the separate dirty tank, keeping it isolated from the clean solution.

Simply empty and rinse the dirty tank after each use. The dual tank design optimizes cleaning performance.

Customizing Cleaning Settings for Different Floor Types

The various cleaning modes on Bissell Proheats allow you to tailor the performance, such as:

  • Surface scrub for lightly cleaning area rugs.
  • Max cleaning or deep carpet mode for high traffic zones.
  • Hard floor setting to prevent scuffing delicate floors.
  • Max mode for extra passes in heavily soiled areas.

Choosing the right preset cleaning mode prevents over-wetting while delivering a customized clean.

Using the Right Cleaning Formula and Water Ratio

Always filling the clean water tank with the recommended ratio of hot tap water and Bissell formula is key. This helps:

  • Boost the effectiveness of the formula.
  • Maintain optimal cleaning pH levels.
  • Prevent mineral scale build-up in components.
  • Reduce sudsing for unimpeded suction.

[Article continues with additional headers and detailed paragraphs…]

One great advantage of Bissell’s Proheat cleaners is the ability to customize the cleaning settings for optimal performance on different floor types.

Customizing Cleaning Settings for Different Floor Types

With their various specialized cleaning modes, Bissell’s CrossWave and PowerBrush Proheat models allow you to tailor the cleaning performance to specific flooring surfaces and conditions:

  • For lightly soiled area rugs, the surface scrub setting provides effective everyday cleaning.
  • Engaging the max clean or deep carpet mode delivers deep cleaning of high traffic zones in wall-to-wall carpeting.
  • The hard floor setting can be used on sealed hard floors to clean effectively while avoiding scuffs and splashes from the brushes.
  • For heavily soiled high traffic areas, max mode makes extra forward and backward passes to remove ground-in dirt.

Choosing the preset mode designed for each cleaning challenge prevents over-wetting while still giving floors the customized clean they need.

Making the Most of the Built-In Brushrolls

Can Bissell

The spinning brushrolls inside Bissell Proheats provide essential scrubbing action. Follow these tips:

  • Adjust the brush speed up for carpets or down for hard floors to prevent splashing.
  • Check brushes often for tangled debris and hair.
  • Give brushes a quick rinse after each use to prevent residue buildup.
  • Replace worn bristles promptly to maintain optimal cleaning performance.

Optimizing brush speed for floor type while keeping brushes debris-free lets you get superior cleaning results.

Understanding How the Dual Water Tanks Work

The separate clean and dirty water tanks are a key feature of Bissell’s Proheat models. Here’s how they work:

  • Fill clean tank with hot tap water and the appropriate amount of Bissell cleaner.
  • This solution gets sprayed onto floors and extracted back into the dirty tank.
  • Keeping clean and dirty water separate enhances cleaning performance.

Empty and rinse the dirty tank after each use. The dual tank system optimizes cleaning effectiveness.

Using the Right Cleaning Formula and Water Ratio

Can Bissell

Always filling the clean water tank with the recommended ratio of hot tap water and Bissell formula helps:

  • Boost the effectiveness of the formula.
  • Maintain optimal pH levels for cleaning.
  • Prevent mineral scale build-up.
  • Reduce sudsing for better suction.

[Article continues with additional headers and detailed paragraphs…]

To get the best performance from your Bissell Proheat cleaner, it’s important to use the right cleaning formula and water ratio in the clean water tank.

Using the Right Cleaning Formula and Water Ratio

Always filling the clean water tank with the recommended amount of hot tap water and Bissell cleaning formula is key to maximizing your machine’s cleaning abilities. Here’s why it’s important:

  • Using the specialized Bissell formulas boosts cleaning effectiveness. They contain proprietary blends designed specifically for use in the Proheat models.
  • The right ratio helps maintain the optimal pH balance for cleaning floors. Too little or too much formula can reduce cleaning performance.
  • Formulas help prevent mineral scale build-up from hard water inside the machine’s components. This maintains spray strength.
  • The correct ratio minimizes sudsing and foaming, allowing for stronger suction power.

Be sure to check the formula bottle for the recommended amount to add per full clean water tank. Using too little may reduce cleaning results, while overfilling can lead to excess sudsing and other issues.

Customizing Cleaning Settings for Different Floor Types

Bissell Proheats allow tailoring the preset cleaning modes to flooring type:

  • Surface scrub lightly cleans area rugs.
  • Max clean or deep carpet mode for high traffic zones.
  • Hard floor setting prevents scuffing delicate floors.
  • Max mode makes extra passes in heavily soiled areas.

Choosing the right mode prevents over-wetting while delivering customized cleaning.

Making the Most of the Built-In Brushrolls

The spinning brushrolls provide essential agitation. Follow these tips:

  • Adjust brush speed up for carpets, down for hard floors.
  • Check for and remove tangled debris and hair.
  • Give brushes a quick rinse after each use.
  • Replace worn bristles promptly.

Optimizing brush speed while keeping brushes debris-free lets you get superior cleaning results.

Understanding How the Dual Water Tanks Work

Here’s how the separate clean and dirty water tanks work:

  • Fill clean tank with water and formula.
  • Solution gets sprayed onto floors and extracted back out.
  • Dirty tank keeps clean and waste water separate.

Empty and rinse dirty tank after each use. The dual tank system enhances cleaning performance.

[Article continues with additional headers and detailed paragraphs…]

Pet dander, pollen and other allergens can collect deeply in carpets and rugs. Optimizing your Bissell Proheat cleaner helps maximize removal of these irritants.

Maximizing Pet Hair and Allergen Removal

Can Bissell

Pet hair, dander, dust mite debris and seasonal pollen can become embedded in carpeting and cause allergy and asthma symptoms. Here are some tips to maximize removal with your Bissell Proheat machine:

  • Always fill the clean water tank with hot tap water. The heat helps optimize cleaning solution effectiveness in lifting and suspending allergens.
  • Make multiple forward and backward passes when cleaning high-traffic areas. This lifts more allergens from deep in the carpet fibers.
  • Use the deep clean or max cleaning mode for high traffic zones where allergens accumulate. The vigorous scrubbing lifts more allergens.
  • Check brushes and nozzles frequently for tangled pet hair. Remove hair wrap to maintain optimal cleaning performance.
  • Change filters at recommended intervals to maintain strong suction power for allergen removal.

Thorough, hot water cleaning along with proper maintenance of filters and brushes promotes a fresher indoor environment with reduced allergens.

Sanitizing and Deodorizing with the Antibacterial System

Can Bissell

The PowerBrush Proheat’s antibacterial system kills germs and bacteria, providing these benefits:

  • Attacks germs using heat and cleaning formula.
  • Reduces mold and bacteria growth in carpets.
  • Eliminates odors trapped in fibers.
  • Creates a more sanitary home environment.

The combined antibacterial agent and hot water leave carpets clean and help prevent future bacteria growth.

Troubleshooting Common Issues and Problems

Occasional issues can arise with Proheat models. If you notice:

  • Reduced spray – clean tips with a paperclip.
  • Floors not drying quickly – empty dirty tank before full.
  • No spray – check formula is added.
  • Brushes not spinning – remove tangled debris.

Quick troubleshooting keeps your Proheat running optimally.

Using the Right Cleaning Formula and Water Ratio

Always use the recommended ratio of hot tap water and Bissell formula in the clean tank. This helps:

  • Boost cleaning effectiveness.
  • Maintain optimal pH balance.
  • Prevent mineral deposits.
  • Reduce foaming for better suction.

[Article continues with additional headers and detailed paragraphs…]

Sanitizing and Deodorizing with the Antibacterial System

When it comes to deep cleaning carpets and hard floors, Bissell’s Proheat models are some of the best and most powerful options on the market. With advanced heating technology and multi-row DirtLifter PowerBrushes, these cleaners are designed to provide professional-style results in your own home. But to truly maximize their cleaning potential, there are some tips and tricks worth knowing.

One of the standout features of Bissell’s Proheat cleaners is the built-in antibacterial system. This system helps sanitize carpets and floors as you clean, killing up to 99.9% of germs and bacteria when used as directed. To activate the antibacterial system, make sure to use one of Bissell’s specialized antimicrobial or oxy formulas designed specifically for use with their cleaners. The heated cleaning solution is what powers the antibacterial action, so be sure to use the heater when cleaning for maximum sanitizing effects.

When tackling pet messes or foul odors, the antibacterial system is especially useful. The deep-cleaning brushes lift stains up from the carpet fibers or cracks in hard floors, while the sanitizing formula eliminates bacteria and neutralizes lingering smells. For best results on pet stains, let the cleaner sit for a few minutes to allow the solution time to work before passing over the area again. The combination of brushing, heating, and antimicrobial action provides a much more thorough clean.

Maximizing Suction for Deeper Cleans

Can Bissell

One common frustration with carpet cleaners is that they don’t seem to provide the same level of suction as a regular vacuum. But Bissell’s Proheat cleaners are designed to offer powerful suction that extracts not just surface-level dirt but deeper-down grime from carpets and hard floors.

Here are some tips for maximizing suction power:

  • Make sure the clean and dirty water tanks are securely attached and properly sealed with no leaks.
  • Check the suction area and remove any debris, hair or fibers wrapped around the brushes.
  • Rinse out the dirty tank frequently so dirt and debris don’t accumulate and clog the vacuum.
  • Use the hose attachment on upholstery to provide direct suction without scattering debris.
  • Adjust the suction settings from low to high power as needed for different levels of soiling.
  • Slowly pass over heavily soiled areas to allow time for thorough extraction.

By keeping the vacuum operating at peak performance, you can take full advantage of the Proheat’s deep cleaning suction abilities.

Using the Right Cleaning Formulas

Can Bissell

Bissell’s specialty cleaning solutions are formulated to complement their Proheat systems. Using the right formulas makes a major difference in how effective the cleaners are.

Some tips on formulas:

  • Use Bissell’s 2X Professional Deep Cleaning Formula for a powerful clean on heavily trafficked areas.
  • Choose an antimicrobial formula containing the HeatWave technology for sanitizing and eliminating odors.
  • For a gentler clean, try the Oxy Pro Formula with oxygen-activated bubbles that lift stains.
  • Pre-treat or spot clean with the compatible Pretreat Formula to break down stubborn stains.
  • Test formulas on small hidden areas first to check for colorfastness.
  • Empty and rinse tanks thoroughly when switching between formulas.

Using the formulas specifically created for Bissell ensures you get the right mix of cleaning ingredients and antimicrobial protection.

Brushing Strategies for Deepest Cleans

The DirtLifter PowerBrushes on Bissell’s Proheat cleaners provide the scruffing action needed to loosen and lift deep-down dirt. Using the right brushing techniques makes a big difference in how deep your clean goes.

Some tips for maximizing brushing:

  • Adjust height as needed so brushes make firm contact with the flooring.
  • Make multiple wet and dry passes over high traffic areas.
  • Use forward and backward motions to reach dirt in all directions.
  • For carpets, brush across the carpet grain to agitate dirt more.
  • Brush slowly to allow time for bristles to penetrate and scrub.
  • Check brushes and remove debris or fibers frequently.
  • Replace brushes every 6-12 months for optimal scrubbing.

Taking the time to brush thoroughly makes an enormous difference in lifting stubborn dirt and stains out of flooring for a like-new look.

Maintenance Tips for Peak Performance

Like any appliance, Bissell’s Proheat cleaners require regular maintenance to keep performing optimally. Here are some upkeep tips:

  • Frequently rinse out the clean and dirty water tanks.
  • Remove and rinse filters monthly or as needed.
  • Wipe down exterior surfaces between uses.
  • Check hoses and nozzles for cracks or obstructions.
  • Use distilled water to prolong heater life.
  • Tighten screws and check gaskets for leaks.
  • Store cleaner upright and emptied when not in use.
  • Replace accessories like brushes and filters regularly.

With proper care and maintenance, your Bissell Proheat cleaner can deliver deep, refreshing cleans for years before needing replacement.

Bissell’s innovative Proheat cleaners offer powerful cleaning for carpets and hard floors when used to their full potential. Following these tips on maximizing the antibacterial system, suction power, brushing, formulas, and maintenance will help you achieve professional-grade cleaning results at home. Give your floors the deep down refresh they deserve with a Proheat’s unmatched scrubbing and sanitizing abilities.

Troubleshooting Common Issues and Problems

Can Bissell

Bissell’s Proheat carpet cleaners are designed for powerful deep cleaning performance, but even quality models can encounter issues from time to time. Learning to troubleshoot common problems can help restore your Bissell to peak cleaning condition.

Here are some of the most frequent complaints and how to resolve them:

Cleaner Won’t Spray Solution

If your Bissell isn’t spraying formula during cleaning, a few things could be going on. Start by checking the fluid levels in the clean water tank. If empty, refill with warm tap water and cleaning formula. Make sure the tank is securely attached and properly seated. Examine the spray nozzles on the foot for debris or buildup and use a paperclip to clear any obstructions. Try adjusting the spray settings from low to high flow. If spray issues persist, remove and rinse the tank cap and filter to eliminate formula residue accumulation.

Poor Suction Power

Weak suction can lead to dirty water left behind in carpets. Check that the dirty tank is firmly latched in place with no leaks or gaps. Remove and rinse out the tank, cap and filter which can collect dirt over time and inhibit airflow. Inspect the suction intake and use scissors to snip away any strings, hair or debris constricting suction power. Make sure your carpets aren’t over-wetted as excess moisture impedes suction. Let carpets fully dry before additional passes.

Cleaner Won’t Turn On

Can Bissell

If your Proheat suddenly stops powering on, start by checking that the power cord is firmly plugged into the wall and securely inserted into the base. Try resetting the breaker switch by turning the cleaner off, unplugging for 1 minute, then restarting. Inspect the electrical connections for damage or severed wires. Make sure the handle release pedals are fully engaged so the cleaner recognizes it’s in use position. If issues continue, contact Bissell support to troubleshoot possible internal electrical problems.

Dirty Residue Left Behind

Seeing dirty water or stains left behind after cleaning is incredibly frustrating. This usually indicates the cleaner needs a thorough internal rinse. Empty the dirty tank, then refill the clean tank with only hot water and no formula. Spray liberally over carpet and extract to rinse residue from hose and internal components. Repeat flushing until water extraction runs clear. Check that your formula isn’t expired or separated. Only mixing concentrates correctly prevents residue. Let carpets dry fully between passes.

Brushes Won’t Spin

The DirtLifter PowerBrushes are the key to lifting deep down dirt from carpeting. If brushes suddenly stop turning, first disengage and re-engage the handle pedal to reset the mechanism. Inspect for obstructions like strings or fibers wrapped around the brush ends. Use scissors to carefully trim away and debris. Check that the belt connecting the brush to the motor isn’t broken or loose. With the cleaner unplugged, you can detach the foot plate and access the belt for replacement if needed. Reattach all screws securely.

Urine Stains Reappear After Cleaning

Pet urine stains that resurface after cleaning need enzyme pretreatment. Use Bissell’s specialized pet urine Eliminator and let sit for 5-10 minutes before scrubbing and extracting. The enzymatic formula breaks down the organic matter in urine to fully remove stains and odor rather than just masking them. Repeat applications if stains persist. Rinsing with white vinegar also helps neutralize urine salts in carpeting.

Heater Stopped Working

Can Bissell

If your cleaner’s heater suddenly shuts off, first check that the thermal protector didn’t trip. Turn the cleaner off and unplug for at least 45 minutes to allow the system to cool and auto-reset before restarting. Try using distilled water, which contains fewer minerals to contribute to scale buildup. Descaling monthly helps prolong heater life and efficiency. Gently wipe the heating element ridges with a soft cloth to remove any debris or buildup. If issues continue, the heating element likely needs replacement.

Leaking Water

Leaks can happen from multiple points on a carpet cleaner. Start by ensuring tanks are fully seated and latched. Examine the tank lids, caps, and filter housing for cracks and replace components if needed. Check cleaning hose connections and tighten if loose. Tighten any accessories like hand tools firmly in place. Look for staining or moisture collecting under the base and check the dirty tank gaskets for gaping or tears allowing suction leaks. Replace worn gaskets annually.

With some periodic maintenance and learning to troubleshoot common issues, most problems with Bissell Proheat cleaners can be quickly and easily resolved. But if you continue experiencing performance problems, reach out to Bissell’s customer service team for tailored troubleshooting advice to get your deep cleaner working like new again.