Home > Customized

How to Replace Cords on Traverse Curtain Rods from Lowes: A Simple DIY Guide

Replacing the cords on traverse curtain rods can seem daunting, but with the right materials and a bit of DIY know-how, it’s a straightforward project that will breathe new life into tired window treatments.

Know What to Look for When Buying Traverse Curtain Rods

When shopping for a new traverse rod to replace an old, worn-out one, keep an eye out for a few key features:

  • Adjustable length – Extendable rods allow you to customize sizing for any window.
  • Smooth gliding – Quality traverse rods feature smooth-rolling pulley systems for easy opening and closing of curtains.
  • Sturdy materials – Metal or hard plastic rods hold up better than cheap plastic versions prone to breaking.
  • Cordless option – For added child safety, some rods operate without dangling cords.

Look through Lowes’ selection of traverse rods in various finishes and styles to find the perfect fit. Their Allen + Roth brand offers customizable traverse kits with all the hardware you need for a new installation. But you can also find basic metal or plastic rods to simply replace an old one as-is.

Prepare Materials Needed to Replace Cords on Traverse Rods

How to Replace Cords on Traverse Curtain Rods from Lowes: A Simple DIY Guide

Before taking down your old traverse rod, gather any necessary supplies, such as:

  • Replacement cord or beaded chain – Choose appropriate size and length for your rod.
  • Needle nose pliers – For pulling old cords out and threading new ones in.
  • Screwdriver – To open end caps and remove brackets if needed.
  • Ladder/step stool – To safely reach the installed rod.
  • Vacuum or towel – To avoid losing any small hardware pieces.

It’s also a good idea to take photos of how the traverse rod was installed originally for reference later. And have a helper on hand if possible!

Take Down the Traverse Rod and Remove Old Cords

Before removing the old traverse rod, pay attention to how it was mounted – inside the window frame or outside, using brackets, screws, or tension rods. Then carefully detach it from the window.

Once you have the rod off, use needle nose pliers to grip and pull out the old cord ends from the pulley mechanisms inside the end caps. You may need to pry the end caps open slightly to access the cord knots. Removing old cord debris now prevents snags later.

Measure and Cut New Curtain Rod Cords

How to Replace Cords on Traverse Curtain Rods from Lowes: A Simple DIY Guide

Lay the empty traverse rod on a flat surface and extend it to full length. Measure how long the replacement cords need to be to reach all the way through each side. Add about one foot extra on each end.

Use sharp scissors or wire cutters to cut the new cord to the measured length. Try to cut both cords identically.

Thread New Cords Through Curtain Rod Ends

Tie a tight double knot at one end of each new cord to create a stopper. Feed the knotted end into the hole in one end cap. Use pliers to grasp the cord and pull it through the internal pulleys.

Repeat the threading on the opposite end cap with the other cord. The knot stops the cord from slipping back out once threaded.

Reattach Curtain Rod End Caps and Rings

If you removed any end caps, reattach them now, securing any loose screws. Also replace any curtain rings that may have fallen off the rod when taking it down.

Spread the rings evenly across the length of the rod so your curtains hang properly again.

Reinstall Traverse Rod and Test New Cord Movement

Referring to your original photos, mount the refreshed traverse rod back in its correct spot above the window. Test the gliding action by gently pulling each new cord to ensure smooth operation.

Give a celebratory tug once you’ve got your window treatment back up and running smoothly!

Tie Knots in Cords to Create Equal Lengths

To finish the new cords with a uniform look, position the rod in the closed position. Then tie a knot in each cord at the equal point you want them to hang.

Trim off any excess cord past the bottom knots for a clean, tailored appearance.

Replace Any Worn or Damaged Curtain Rod Hardware

While you have the traverse rod down, inspect all parts for signs of wear – fraying cords, cracked plastic pieces, loose screws, sticky rollers, etc. Replace components as needed to ensure optimal function.

Upgrading faulty hardware now prevents having to repeat this repair process unnecessarily down the road.

With good quality replacement cords and some DIY handiwork, you can easily breathe new life into worn-out traverse curtain rods. No need to endure broken cords or shop for costly new window treatments. Simply follow this guide for smooth gliding curtains once more.

Having the right materials on hand is crucial when tackling a traverse rod cord replacement project. Taking the time to gather supplies and tools ahead of time makes the process smoother and prevents frustration from halted progress or sloppy mistakes.

Prepare Materials Needed to Replace Cords on Traverse Rods

How to Replace Cords on Traverse Curtain Rods from Lowes: A Simple DIY Guide

Before diving into removing the old, worn out cords from your Lowes traverse rods, spend some time assembling the necessary replacement parts and handy tools for the job.

  • New cord or beaded chain – This is the most essential component. Measure your current cord and purchase a similar style and thickness replacement cord in the appropriate length.
  • Needle nose pliers – The grippy, pointed pliers allow you to get a good hold on cord ends when pulling them out of pulleys and threading new ones through.
  • Screwdriver – You’ll need a Philips or flat head screwdriver to remove any screws holding end caps or wall mount brackets in place.
  • Step stool – Ensure you can safely reach the height of the installed rod without teetering on chairs or ladders.
  • Vacuum – Gather any fallen parts immediately to avoid losing pieces underfoot.
  • Painter’s tape – Useful for temporarily adhering any hardware components or labeling cords.

While not absolute necessities, a few other handy items could make the repair go more smoothly:

  • Gloves – Protect hands from abrasions when pulling on cords.
  • Rags or towel – Prevent scratches to the rod finish if laid on your work surface.
  • Container – Keep all removed screws, brackets, end caps together.
  • Photos – Document how your specific rod was installed for reference.
  • Helper – An extra set of hands is always useful!

Take inventory of what you already have available in your home tool kit and make a list of anything you need to purchase. Acquiring the necessary replacement cord for your Lowes traverse rods is key – have the measurements and style details on hand when shopping. Rigid beaded chain styles take more strength to install but eliminate twisting problems.

Once you’ve amassed all the requisite equipment, you’ll be primed to efficiently take on the traverse rod cord switch out. No need to stop mid-project to hunt down a stray tool or indispensable supply item. With your DIY toolkit fully prepped, you can tackle the repair with confidence.

Having to improvise tools or make multiple trips to the hardware store during jobs like this can really derail momentum and frustrate even the most patient do-it-yourselfer. Save yourself time, aggravation, and unnecessary expenses by making a comprehensive list and gathering all the needed materials before starting the repair process.

Investing a little thought and effort upfront to prepare your replacement cord, tools, ladder, and other supplies will pay off hugely in allowing a smooth, seamless traverse rod cord replacement project from start to finish.

Once you’ve got all your replacement cord, tools, and supplies prepped and ready, it’s time to carefully take down the installed traverse rod and fully remove the worn out cord.

Take Down the Traverse Rod and Remove Old Cords

How to Replace Cords on Traverse Curtain Rods from Lowes: A Simple DIY Guide

Start by studying how your existing Lowes traverse rod was mounted – inside the window frame, outside using brackets, up with tension rods, etc. Document with photos or drawings if needed. Then begin gently taking down the rod from its installed position above the window.

Place the rod on a protected surface like a towel on a table. Extend it to full length so you can access both ends. Now you’re ready to fully extract the broken traverse cords.

Look inside the end caps to locate where the cords enter small holes, then feed through internal pulleys. You’ll need needle nose pliers to firmly grip the frayed ends and pull them completely out of the pulley system. Take care not to bend or damage the thin metal guts.

The old cords may catch on internal parts as you pull, so slowly work them fully out. Watch for any debris like bits of cord ending up loose inside the rod – remove these to prevent future snags.

You may need to carefully pry off end caps to more easily access the entry holes as you remove old cord remnants. Just don’t lose any loose screws! Set caps and hardware aside together.

With the worn traverse cords fully extracted, inspect the rod for any other apparent damage like cracked plastic pieces, worn pulleys, or loose screws. Make notes on anything else needing replacement or repair later.

Take a vacuuming pass over your workspace to pick up any dust or parts that fell out. Now your Lowes traverse rod is ready for fresh new cords to be threaded through.

Patience is key when removing old traverse cords – forcing or rushing could bend pulleys or break components. Work slowly and carefully for a smooth transition to the new replacement cords.

Pro Tip: If you’re unable to pull cords fully out despite pliers and elbow grease, try attaching a small weight (like a hex nut) to the end of each cord. Letting gravity help tug it through the pulleys overnight can do the trick!

With some finesse and DIY determination, those worn out cords don’t stand a chance. Take your time removing them completely to start your Lowes traverse rod repair off right.

Once you’ve fully removed the old, worn out traverse cords from your Lowes rod, it’s time for the fun part – measuring and cutting fresh new cord to thread back through.

Measure and Cut New Curtain Rod Cords

Lay your empty traverse rod on a flat, protected surface and extend it out to full length. This is easiest with a helper holding one side steady. But you can also prop it between two sturdy chairs.

Now measure the distance needed for the replacement cords to run the entire length inside the rod and back out the opposite end. Add at least 12 extra inches, more for longer rods, to give room to knot and grip the ends.

Carefully mark this measurement on your new spool of traverse cord. Use sharp scissors or wire cutters to cut each new length – be extremely precise to cut both identically.

To be safe, you may want to cut longer at first. Test thread one piece fully through before cutting the other. You can always trim more off later if too long.

In a pinch, you could use a rough non-stretchy material like twine for measuring. Just mark and cut your final cords a little longer since the thickness differs.

Watch out for accidentally cutting new cords too short! Leave ample extra length to work with for knotting and handling during threading. Err longer rather than shorter.

Pro Tip: Wrap a small piece of painter’s tape around each measured point before cutting to clearly mark cord length needed.

When precisely measured and cut, your new replacement cords will feed through the Lowes traverse rod smooth as butter and restore your windows to working order. Just resist rushing – careful measuring now prevents headaches later!

Patience and precision pay off when marking and cutting fresh new traverse cords. So breathe deep and take your time to measure twice and cut once. You’ve got this!

Now for the fun part – threading your fresh new cords through the Lowes traverse rod pulley system to bring it back to working order. Take your time here for smooth operation.

Thread New Cords Through Curtain Rod Ends

How to Replace Cords on Traverse Curtain Rods from Lowes: A Simple DIY Guide

Start by tightly tying a double knot at one end of each replacement cord. This knot will stop the cord from pulling back through once threaded.

Look inside one end cap to locate the small hole where old cords fed into the internal pulleys. Use needle nose pliers to grip the knotted end of one new cord. Carefully insert into the hole and steadily guide it through the pulley system from one end of the rod to the other.

Have a helper hold the opposite rod end, or prop it steady between two chairs. Patiently keep feeding until the knotted cord end emerges from the other end cap hole.

Now repeat the process with the second new cord through the other end cap. Take care not to cross or tangle the cords inside the rod.

Gently tug the ends once threaded to ensure the cords are fully engaged in the pulleys for smooth operation. Nice work!

Pro Tip: Try securing a vacuum hose near the cap holes as you thread cords. This way any falling debris gets sucked up immediately.

Threading new traverse cords requires focus and diligence to carefully feed through the narrow pulley system without snagging. But the precision pays off in buttery smooth operation once installed!

Patience and care while threading leads to traverse rod success. By taking your time, you’ll have that window treatment working like new again. Feel the satisfaction of reviving handy DIY skills as those cords glide through smoothly.

After threading the new cords through your Lowes traverse rod, it’s time to reassemble the hardware so you can rehang the window treatment.

Reattach Curtain Rod End Caps and Rings

How to Replace Cords on Traverse Curtain Rods from Lowes: A Simple DIY Guide

Hopefully you kept all the end caps, screws, brackets and rings together as you disassembled the old traverse rod. Now it’s time to put components back in their right places.

Take each end cap and secure any loose screws back into place. Slide the caps back on, being sure the new cords align properly to feed back out the holes.

Before fully tightening caps, tug cords to double check they still glide smoothly. Adjust if needed before final tightening.

Next, space out all the curtain rings evenly across the length of the rod. Depending on your specific hardware, the rings may click into place, twist-lock, or slide loosely.

Make sure to redistribute any previously removed rings so your curtains hang properly again. Loading rings mostly to one side can make curtains hang uneven.

Finally, reattach any wall mount brackets or tension rods needed to rehang the assembled traverse rod back up over the window.

Inspect closely that all pieces are securely fastened and properly aligned before finishing the reassembly. Prevent problems now versus after rehanging!

By methodically reconstructing all the traverse rod components, you guarantee smooth operation for years to come. Take pride in a job well done reviving your window treatments!

The moment of truth has arrived! Time to put that refreshed Lowes traverse rod back up and admire your handiwork in action.

Reinstall Traverse Rod and Test New Cord Movement

Refer back to any photos or notes you took about how your specific traverse rod was mounted over the window – inside the frame, outside using brackets, with tension rods, etc. Recreate the original installation location precisely.

Carefully lift the rod into position, threading any screws into wall mounts or sliding tension rod ends into place. Have a helper hold it steady as you get it secured.

Before fully tightening everything, test that the new cords move smoothly by gently pulling each one. The traverse mechanism should glide easily side to side.

Tug firmly but slowly to ensure no snags. Cords should have continuous tension – no jumping or catching. If needed, take back down to inspect pulleys and threading to address any issues.

Once certain the cords operate smoothly, finish securing the rod into its final mounted position. Stand back and admire your handiwork!

Troubleshooting now prevents headaches later. So take the time to methodically test function before finalizing the traverse rod reinstallation.

Pat yourself on the back for a job well done reviving those tired old Lowes traverse rods. Then pull those cords and relax as your curtains glide gracefully once more!

For a clean, polished look, take a moment to adjust the new traverse cords to evenly matched lengths before completing the project.

Tie Knots in Cords to Create Equal Lengths

How to Replace Cords on Traverse Curtain Rods from Lowes: A Simple DIY Guide

With the Lowes rod rehung and cords moving smoothly, position the rod in the fully closed position.

Note where each new cord ends relative to the other. You want them to hang at precisely the same level along the bottom for a symmetrical look.

On the longer cord, tie a tight knot near the end at the spot that matches the length of the shorter cord. This evenly aligns the bottoms.

For optimal visibility, use a contrasting colored thread or zip tie to make the alignment knot more visible.

Excess cord dangling below the knot can get tangled or catch on window cranks. So trim any excess length below the knots for a clean finish.

Step back and admire the freshly tied knots neatly aligning the bottom of the cords. Satisfying!

Pro Tip: Hang a lightweight level clip on the knots to easily spot any slight differences in cord length and fine tune as needed.

With matching cord lengths, your window treatment looks crisply tailored and professional. Take pride in the details like properly proportioned traverse cords!

Symmetrical length cords provide a visually pleasing finish. So take a moment to evenly tailor the new cords before completing your traverse rod revival project.
Here is a 1000+ word article on how to replace cords on traverse curtain rods from Lowes:

If you have traverse curtain rods that are missing cords or have broken cords, replacing them is a relatively easy DIY project. Traverse rods are a popular style of curtain rod that allow you to open and close curtains by pulling on a cord. Over time, these cords can become frayed, break, or even get lost. Thankfully, replacing traverse rod cords is simple with just a few tools and materials from your local Lowes store.

Replace Any Worn or Damaged Curtain Rod Hardware

How to Replace Cords on Traverse Curtain Rods from Lowes: A Simple DIY Guide

Before replacing the cord itself, inspect your traverse rod closely for any other worn or damaged parts. Check for loose or stripped screws, bent rods, or broken pulleys. Replacing any damaged hardware now will make re-threading the new cord much easier. Lowes carries traverse rod repair kits with common replacement parts like screws, cord pulleys, cord tensioners, and metal sheer gliders. Purchase any parts you need to get your rods and hardware in good working order again.

Gather Your Materials

Here’s what you’ll need to pick up from Lowes to replace traverse curtain rod cords:

  • Replacement traverse rod cord – Select the appropriate length, thickness, and style to match your existing cords. Bring a sample cord to ensure you get an identical match.
  • Metal tape measure – This will make getting an accurate cord length much easier on the long drapery rod.
  • Needle nose pliers – Helpful for pulling cords through narrow openings and pulleys.
  • Zip ties – Use these to secure the new cord until fully threaded.
  • WD-40 lubricant spray (optional) – Can help cords glide more smoothly if pulleys are stiff.

You’ll also need scissors to cut the new cord once threaded and installed. Avoid cutting cords over carpet where snippets can get lost easily. Gather all your materials and tools before getting started.

Measure and Cut New Cords

Refer to your owner’s manual for the recommended cutting length of replacement cords. If you don’t have this, use your metal tape measure to measure the length of the existing cord path along the rod, from end to end. Add an extra foot or two to give yourself plenty of room for tying knots and mistakes. Use scissors to cut the new cord to this measured length.

Tie Cords to Rod Ends

Start at one end of the rod, tying or knotting the new cord securely around the screw, bolt, or tensioner hardware where the previous cord was attached. Leave at least 6 inches of excess cord. Use pliers to tightly wrap and knot the cord several times. Use a zip tie as a backup to hold the cord in place temporarily. Follow the same process at the opposite end of the rod, attaching the other end of the new cord.

Thread Cord Through Rod Openings

Now comes the tricky part – threading the new cord through all the pulleys, rings, and openings along the length of the rod. Start where you tied the first knot, threading the cord through each metal glider in order. Use needle nose pliers to grip the cord if needed. Apply some WD-40 lubricant if pulleys are stiff or catches snag the cord. Be patient and careful not to force the cord or bend it sharply.

Connect Cord to Master Pulley

How to Replace Cords on Traverse Curtain Rods from Lowes: A Simple DIY Guide

When you reach the master pulley in the center, loop the cord through as directed in your owner’s manual. There should be a hook, ring, or clasp where both cord ends meet at the master pulley. Secure cords here with a zip tie for now.

Adjust Cord Length

Gently pull the cord along the full length of the rod, sliding gliders from one end to the other to test it out. Adjust the cord connections at the ends to get rid of any excess slack or tightness. The gliders should smoothly traverse the full length without sagging or binding. Trim any excess cord as needed and re-tie knots securely.

Install Cord Tensioner and Lift Cords

Locate where your lift cords originally hung down from the master pulley. These allow you to pull the cord to open and close the curtains. Cut two lengths of new cord about 8 inches long. Use pliers to attach these lift cords to the master pulley, tying multiple knots for a secure hold. Add a cord tensioner or tie-down cleat near the window frame, looping each lift cord through it separately.

Test Traverse Rod and Enjoy!

How to Replace Cords on Traverse Curtain Rods from Lowes: A Simple DIY Guide

Give those new cords a tug and watch your curtains glide smoothly across the rod once again! No need to fully remove and re-install traverse rods when the cord wears out. With about $10 of replacement parts from Lowes and a little DIY spirit, you can have your curtains opening and closing like new.

Following this cord replacement process helps restore worn traverse rods of any length or design. Whether you have simple straight rods above kitchen sinks or long, curved traverse rods over sliding doors, the steps are essentially the same. Replace damaged parts, accurately measure new cord length, securely tie knots, patiently thread cords through openings, and adjust for proper tension. Take your time and refer back to diagrams in your owner’s manual. In just an hour or two, you can save the cost of hiring a professional and get many more years of service from your traverse rod system.

Do your traverse curtains get stuck halfway or no longer glide smoothly across the window? Over time, the operating cords on traverse curtain rods can fray and break. But don’t despair – with a few basic tools and materials from Lowes, you can easily replace those worn cords yourself. Follow this simple DIY guide to enjoy smoothly operating traverse curtains once again.

Enjoy Smoothly Operating Traverse Curtains Again!

Traverse curtain rods are designed with a pulley system that allows you to open and close curtains by pulling on cords. But after years of use, those cords become brittle and snap. Replacement traverse cord kits are available at Lowes for any standard or custom-sized rod. With about an hour of time and some patience, you can thread new cords yourself rather than hiring a professional.

Assess Your Traverse Rod

Before replacing the actual cord, inspect your rod for any other needed repairs. Look for loose screws, bent sections, or broken pulleys. Lowes sells affordable traverse rod repair kits with replacement hardware like end caps, screws, rings, gliders, and tension pulleys. Purchase any parts needed to ensure smooth operation.

Purchase Your Supplies

Pick up the following supplies at your local Lowes to complete this project:

  • Replacement traverse cord in matching size and style
  • Needle nose pliers to grip cords
  • Metal tape measure for accurate lengths
  • Scissors for cutting new cord
  • Zip ties to temporarily hold cords
  • WD-40 lubricant for stiff pulleys

Lowes even sells complete traverse cord replacement kits with all the basics you need for one low price. It helps to bring an old cord sample when shopping.

Carefully Measure Cord Length

How to Replace Cords on Traverse Curtain Rods from Lowes: A Simple DIY Guide

Use a metal tape measure to find the exact cord length needed. Run it along the rod from end to end following the path of the pulleys and rings. Add about 12-18 extra inches to allow for knots and adjustments.

Cut and Tie New Cords

Using sharp scissors, cut your replacement cord to the measured length. Start by tightly tying one end of the new cord at a rod end using several knots. Repeat to tie the other end in place temporarily.

Thread Cord Through Rod

Here comes the tricky part – threading the new cord through the full length of rings, pulleys, and openings. Use pliers if needed to grasp the cord. Apply WD-40 to lubricate stiff spots. Take it slowly to avoid snags.

Connect Cord at Master Pulley

When you reach the master pulley, loop cord through properly. There may be a specific hook, clasp or ring to attach both cord ends at the master pulley. Use zip ties to hold cords temporarily.

Adjust and Tension Cords

Gently slide gliders back and forth across the rod to test cord tension. Re-tie knots and trim excess cord as needed until the gliders move smoothly without sagging or binding.

Add Cord Lift Loops

How to Replace Cords on Traverse Curtain Rods from Lowes: A Simple DIY Guide

Cut two 8-inch pieces of cord to create lift loops. Tie these securely to the master pulley area. Add a cord tensioner or cleat and loop lift cords through separately.

Enjoy Smooth Operation!

Give those new cords a strong tug and watch your curtains glide beautifully once again! With about $15 of Lowes parts and some elbow grease, you can save hundreds of dollars on professional repairs. Follow the same process for traversing rods of any length or design.

Many homeowners think traversing curtain issues require replacing the entire rod and hardware system. But often it’s just a matter of worn out lift cords. By assessing your rod, purchasing quality Lowes replacement cords, carefully measuring and threading, and properly tensioning the cords, you can have your traverse curtains working like new again in just an hour or two. With a little patience and the right materials, this is an easy DIY project that breathes new life into tired traversing rods of all kinds.

Don’t put up with stuck, sagging curtains over your windows and doors. Simply replacing the traverse rod cords restores smooth operation for just a few dollars. Keep your repair tools and extra cord handy so you can periodically replace worn cords over the years. Your Lowes-refurbished traversing curtains will keep windows covered and add beauty to your home decor for years to come.