Home > Customized

Give Your Chair a Makeover: 10 Unique DIY Checkered & Gingham Chair Sash Ideas

Upcycle Old Fabric into Checkered Chair Sashes

You know what really grinds my gears? Perfectly good furniture that gets tossed out simply because the upholstery is worn or dated. Well friends, I’m here to tell you those sad, neglected chairs don’t have to end up in the dump. With a little DIY spirit and some checkered or gingham fabric, you can give faded furniture a fresh new look for just pennies on the dollar. Intrigued? Read on for my top tips on upcycling old fabric into checkered and gingham chair sashes.

First things first – rummage through your closet, raid grandma’s sewing box, or hit up the thrift store for castoff fabrics. Anything lightweight and rectangular will do the trick. To make classic checkered patterns, look for fabrics like old flannel shirts, picnic blankets, or quilts in complementary colors. For a gingham look, grab some cotton calico, bandanas, or handkerchiefs. Don’t stress about stained, ripped, or irregular pieces – we’ll just be cutting shapes and patterns rather than using the fabric as-is.

Next, bust out the scissors and get snipping. For checkered sashes, cut uniform squares, rectangles, or diamonds in contrasting shades. The shapes don’t need to be perfect or identical, so don’t waste time measuring. Just eyeball some pieces in the 2-4 inch range and let your creativity flow. For gingham, cut longer bias strip rectangles around 1 inch wide. You can make them from a single fabric or alternate colors.

Now comes the fun part – arranging your upcycled fabric pieces into eye-catching patterns. Lay out the shapes on a table or the floor until you find a combination that pops. For checkered sashes, try alternating colors in a grid or zigzag layout. With gingham, overlap the bias strips in rows, alternating the color direction each row. Play around until you find a sequence you love.

Finally, it’s time to attach the sashes to your chairs. For a temporary look, use fabric glue or double-sided tape to adhere the pieces directly onto the chair seat and/or backing. For a more permanent fix, carefully sew the arranged fabric pieces onto a ribbon or strip of scrap fabric, then staple, nail, or glue the finished sash in place on the chair.

And voila – in just a few easy steps, you’ve transformed tired old chairs into stylish showstoppers. Those creaky castoffs now boast custom upholstery for a fraction of the price of reupholstering. And bonus – you’ve kept some perfectly usable materials out of the local landfill. Next time you come across a worn piece of furniture headed for the curb, think twice – with a little checkerboard charm, you can give it new life.

Make Gingham Chair Sashes from Bandanas

Give Your Chair a Makeover: 10 Unique DIY Checkered & Gingham Chair Sash Ideas

Bandanas – the iconic spotted and paisley-printed squares have been cooling cowboys’ necks and mopping sailors’ brows for generations. But did you know these humble kerchiefs can also become chic gingham sashes for your plain wood or upholstered chairs? It’s true, friends! With some simple folding and fabric glue, you can quickly transform a pile of bandanas into custom chair trims to give your dining space a farmhouse fresh look.

Start by gathering an assortment of cotton bandanas in coordinating colors like red, navy, black, and white. Solid colors work best rather than busy prints that will compete visually. Next, fold each bandana in half diagonally to form a triangle. Then fold it in half again so you have a long narrowed strip.

Now, apply a line of fabric glue down the center of the folded bandana strip. Place another bandana strip perpendicular to the first, gluing where they overlap. Continue alternating and overlapping bandana strips, rotating each one 90 degrees to achieve a gingham pattern.

Once your gingham bandana strip is the desired length, wrap it around the seat back or underside of your chair. Secure temporarily with clothespins while the glue dries. For extra stability, you can also nail or staple the ends in place.

That’s it – with just some humble bandanas from the thrift store and a bit of crafty handiwork, you can create a custom gingham sash for your chair. It adds a playful pop of pattern to an otherwise plain chair. Or use it to disguise damage or stains on upholstered seating. However you use them, these bandana upcycles are sure to impress guests with your resourceful country charm.

Sew Checkered Sashes from Various Fabric Scraps

Give Your Chair a Makeover: 10 Unique DIY Checkered & Gingham Chair Sash Ideas

Don’t toss those solitary sock remnants, orphaned swatches from past projects, and leftover fabric bits quite yet. With a needle and thread, you can transform those textile odds and ends into checkered sashes perfect for accenting plain wood or upholstered chairs. Mix and match those neglected fabric scraps for custom checked upholstery accents on a dime.

Rather than precise measuring, we’re going for an eye-catching abstract look here. So dig through your sewing box, fabric bin, even old clothes for usable remnants at least 3 inches square. Solids, prints, even textures work for a scrappy checkered aesthetic.

Arrange the pieces into an appealing abstract checkerboard design before sewing. Play with different scale blocks and layouts. Once you map it out, sew the scraps together along adjoining edges, using straight or zigzag stitches in a complementary thread color.

When your patchwork checkerboard strip reaches the desired length, hem or bind the edges so they’re neat and tidy. Then use fabric glue, nails, or staples to affix the sash to a plain chair seat, back, or frame. Consider tying on removable bows so you can switch up patterns down the road.

With a little imagination and thrift, those random fabric leftovers can find new life accenting your chairs or furniture. It’s a great way to add pops of color and interest while stopping useful scraps from going to waste. And think of the compliments you’ll get on your creative upcycling skills!

[Article continues with 5 more detailed sections on unique DIY checkered and gingham chair sash ideas]

Make Gingham Chair Sashes from Bandanas

Well butter my backside and call me a biscuit, bandanas aren’t just for cowpokes and outlaws anymore! These handy kerchiefs can become the perfect country chic trim for your plain old chairs. All you need is some fabric glue and a pile of bandanas in your favorite colors. Then you can transform those bland seats into veritable works of gingham art. It’s easier than lassoing a calf at branding time, and cheaper than hiring some fancy city slicker upholsterer to boot!

Now the first thing we gotta wrangle are the bandanas themselves. Mosey on down to the mercantile or second-hand store and pick you out a passel of cotton bandanas in colors you fancy. Solids like red, blue, white or black work best rather than those busy paisley prints that’ll just clutter things up. And don’t fret none if they’re a little frayed or stained – we’re making diamonds here, not dressing a debutante.

Back at the ranch, take each bandana and fold it corner to corner into a triangle. Then fold it in half again so you’ve got yourself a long, narrow fabric strip. Now drizzle some of that fabric glue down the center of the folded bandana. Then take another strip and overlap it perpendicular style. The glued parts will stick together where they cross, making the grid pattern of gingham.

Keep on alternating and a-criss-crossing those bandana strips, rotating each one 90 degrees as you go. When the gingham strip reaches clear across your chair, just wrap it round the seat or underside and hold tight with some clothespins ’til the glue sets. A few nails or staples wouldn’t hurt neither to keep things locked down permanent-like.

And that’s all she wrote! With a little bandana transformin’, you’ve turned that boring old chair into a spectacle sure as shootin’. Your guests will think you’ve got clothier skills to beat the band when they behold those custom gingham sashes. So grab your glue gun and git on stitching, partner!

Now for some more rootin’ tootin’ upcycling inspiration…

Sew Checkered Sashes from Various Fabric Scraps

Give Your Chair a Makeover: 10 Unique DIY Checkered & Gingham Chair Sash Ideas

Looking for a quick and easy way to spruce up some old chairs? Consider sewing your own unique checkered or gingham chair sashes! This simple DIY project allows you to customize the look of your chairs by using scraps of fabric you may already have at home.

Checkered and gingham prints never seem to go out of style. The classic black and white checkered pattern brings a touch of retro charm to any space. Or opt for bolder, brighter gingham prints in cheery colors like red, blue, green or yellow. Coordinate the hues with your existing decor, or use the chair sashes to inject a pop of color into an otherwise neutral room.

The best part is that chair sashes are so easy to make, even beginner sewers can tackle this project. And you don’t need much fabric at all, making it a thrifty way to upcycle leftovers. Keep reading for 10 creative ideas for DIY checkered and gingham chair sashes that will instantly give your seating a facelift.

1. Stitch a Simple Straight Sash

Give Your Chair a Makeover: 10 Unique DIY Checkered & Gingham Chair Sash Ideas

For a classic sash, cut your fabric into long strips about 5-6 inches wide. Iron the strips to remove any wrinkles. Then, fold each strip in half lengthwise with wrong sides together and press again. Stitch a straight seam along the open long edge to create a tube. Turn right side out and slide over the back of your dining chair, centering the sash. Tie loosely at the waistline for a tailored bow.

2. Add Length with Joined Strips

If your fabric scraps aren’t quite long enough, join multiple strips together. Cut each piece to the same width and sew the ends together, alternating the print pattern. Once all seams are sewn, iron the full length of fabric flat. Then simply fold, sew into a tube and apply to the chair as in the previous idea. The seam will blend right in!

3. Get Creative with Angled Strips

Give your sash more visual interest by cutting strips on the bias, at a 45-degree angle. Line up corners when joining angled pieces. The resulting diagonal print design draws the eye. For extra flair, cut some strips with sharp zig-zag edges instead of straight lines before sewing into a tube.

4. Incorporate Pretty Trims

Enhance your sashes with complementary trims. Consider rickrack, pom poms, tassels or ribbon roses sewn on for a decorative touch. Or insert colorful lace or eyelet trim between the folded edges before stitching into a tube. Such embellishments dress up a basic sash in minutes.

5. Go for Broader Widths

Wider sashes make a bolder style statement. Cut strips about 8-12 inches across, then fold, iron and stitch as before. The more generous proportions suit some large armchair styles or dining chairs with high backs. Drape the fabric loosely and tie in a full bow rather than stretching tightly around the chair.

6. Pleat for Visual Depth

A knife pleat sash has elegant dimension. Make small, evenly spaced pleats across the entire length of fabric before folding and sewing into a tube. Angle the knife pleats all facing the same direction. The sculptural detail catches the eye from every viewpoint. Let the pleated sash drape freely down the chair back.

7. Contrast Lining with Coordinating Fabric

Give Your Chair a Makeover: 10 Unique DIY Checkered & Gingham Chair Sash Ideas

For a polished touch, use different fabrics for the outer sash and lining. Cut two same-width strips, one from each contrasting print. With right sides together, stitch together along both long edges, leaving the short ends open. Turn the tube right side out through one open end. Then simply slide the reversible sash onto the chair for a hint of the inner lining fabric to show through.

8. Incorporate Buttons or Bows

Personalize your DIY sashes by adding decorative buttons or fabric bows. Sew large buttons in a vertical line evenly spaced down one side of the sash before slipping onto the chair. Or hand-stitch small cluster bows out of fabric scraps at intervals. Have fun mixing and matching prints for a playful mismatched look.

9. Make a Checkered Pattern from Squares

Go beyond basic stripes and plaid by piecing together unique patchwork prints. Cut out fabric squares in varying sizes and sew together with a 1/4″ seam allowance to form a long strip. Press seams to one side, then fold and stitch into a tube as usual. The rainbow or ombre color combinations are endlessly customizable.

10. Add Whimsy with Ruffles

Give Your Chair a Makeover: 10 Unique DIY Checkered & Gingham Chair Sash Ideas

Ruffled sashes impart a whimsical, feminine vibe. Cut strips about twice as wide as normal. Sew basting stitches along both long edges and gently pull the bobbin threads to gather the fabric. Smooth the ruffles to distribute evenly, then complete folding, ironing and stitching into a ruched tube shape. The ruffled texture pairs perfectly with delicate chairs.

With just some scrap fabric and basic sewing skills, you can quickly transform inexpensive wooden chairs into chic seats for the kitchen, dining room or bedroom. Which checkered or gingham sash style will you stitch first? Get creative mixing and matching prints that reflect your personal sense of style. Surprise guests and delight your family by giving chairs in your home a charming makeover!

Tie-Dye White Fabric for Custom Checkered Prints

Tired of ordinary solid or striped chair sashes? Why not try your hand at tie-dyeing to create unique DIY checkered fabric for chair accents! With some white fabric, dye and rubber bands, you can easily whip up custom checks or ginghams in any colors you choose.

Tie-dyeing may bring back memories of summer camp. But it’s not just for t-shirts! This fun technique works on all types of fabric. For chair sashes, start with pre-washed white cotton or linen yardage. Then get out the dye and get ready to experiment.

With a few tricks, you can control the tie-dye process to end up with neat and orderly checked or plaid patterns. The results add a special handmade touch to basic dining room or kitchen chair upholstery. Read on for a beginner’s guide to fantastically funky DIY tie-dyed checkered chair sashes.

Supplies Needed

First, gather the following supplies:

  • White fabric yardage, like cotton or linen
  • Fiber-reactive dye in assorted colors
  • Rubber bands
  • Plastic gloves
  • Squeeze bottles for dye
  • Large plastic bins or trays
  • String or twine
  • Scissors

Preparing the Fabric

Wash and dry the white fabric prior to tie-dyeing to remove any chemical residues from manufacturing. This helps the dye absorb evenly across the entire surface.

Cut fabric into 6-8 inch wide strips, the planned width for your finished chair sashes. The length depends on the size of your chairs. For standard dining chairs, strips about 5 feet long usually suffice.

Creating Checkered Patterns

There are a couple approaches to generating checkered tie-dye patterns on fabric strips for chair sashes.

One easy technique is accordion folding. Fold the fabric lengthwise into 1-2 inch accordion pleats. Use rubber bands to bind the folded fabric every 2-4 inches. The more rubber bands, the smaller the checks will be. Squirt dye into the folds, regenerating color variations.

You can also tightly scrunch the fabric strip widthwise into undulating wrinkles. Wrap rubber bands around each puckered section to hold the shape. Dye the compressed wrinkled fabric, then rinse to reveal organic wavy stripes.

For more controlled checkerboard effects, try knotting the fabric. Start by laying the strip flat. Use string to knot together tiny bunches of fabric across the surface, spacing knots about 1 inch apart. The knotted squares will resist absorbing dye. Rinse to reveal a dotted grid pattern.

DIY Dip-Dye Technique

Give Your Chair a Makeover: 10 Unique DIY Checkered & Gingham Chair Sash Ideas

Another way to form checks is dip-dyeing in small sections. Fold over about 1 inch of fabric at the top edge. Use clothespins to tightly clip the folded section in place. Submerge just the bottom portion of fabric in dye for a few minutes before rinsing. Repeat folding, clipping and dipping every 1-2 inches down the remainder of the strip to produce block bands of color.

Trying Different Dye Colors

Experiment with combining various dye hues to create unique gingham or buffalo check patterns. Start by dipping the lower half of the folded strip in one color, then switch to another shade on the upper portion. Or alternate dipping folded sections in contrasting colors down the length of the fabric.

You can also scatter dye powders directly onto the twisted, pleated or knotted fabric. The dye will transfer random organic prints. Use 2-3 colors for a handcrafted plaid or checkerboard look.

Setting the Dye

After dyeing and rinsing, wash the fabric strips separately in hot soapy water to remove excess dye. Then dry and iron. The heat helps permanently set the colors by bonding the dye with the fibers.

Now your custom tie-dyed checkered or plaid fabric is ready to stitch into trendy DIY chair sashes! Just fold each strip in half lengthwise and sew into a tube shape. Slide onto the dining chair back and tie loosely at the waistline. The creative handmade touch will make your chairs stand out in any room.

With some practice, you can create any checkered or gingham pattern imaginable using tie-dye techniques. Try alternating warm and cool shades, go for bold primaries or pastels, or use complementary colors for visual impact. Let your imagination run wild!

Use Iron-On Transfer Paper for Checkered Patterns

Give Your Chair a Makeover: 10 Unique DIY Checkered & Gingham Chair Sash Ideas

Iron-on transfer paper opens up endless possibilities for creating customized checkered and gingham chair sashes. With simple tools you likely already own, you can transfer any checkerboard or plaid pattern onto fabric to make unique DIY accents for your chairs.

Iron-on transfers, also called heat transfers, allow you to print digital designs and transfer the image onto fabric. All it takes is a home printer, transfer paper sheets, fabric, and a good hot iron to apply the motifs. This easy technique gives you full creative control to make any check or plaid print imaginable!

Dress up plain wooden chairs with your own signature checkered sash design. Here are some ideas and tips for making chair accents using iron-on transfers.

Choose Checkered Images to Print

First, search for check or plaid patterns you like. Look for clip art or other images with high contrast and simple graphic elements that will translate clearly in print. Consider black and white checks, buffalo checks, gingham and other classic motifs. Or create your own pattern in photo editing or design software if you want a truly custom look.

Buy Iron-On Transfer Paper

Transfer paper is coated with a material that adheres printed designs to fabric when ironed on. Buy sheets designed for home inkjet printers. Laser printer transfer paper also works well. Opt for transfer material suited to the fabric type you’ll be using, like cotton, polyester or blend.

Print Checkerboard Designs

Print the checkered designs onto the iron-on transfer sheets according to package directions. Most transfer papers print best at the highest print quality setting. Allow the ink to fully dry before proceeding.

Cut Fabric for Chair Sashes

Cut cotton, linen, polyester or other fabric into 6-8 inch wide strips for the sashes. About 5 feet long is ideal for most dining chairs. Pre-wash fabric if desired to preshrink. Trim to evenly squared edges.

Iron On the Transfer

With a dry iron on the highest heat setting, press the transfer paper print side down onto the fabric. Use firm pressure. Slowly peel back the transfer sheet after about a minute. The printed design should remain adhered to the fabric.

Sew into Checkered Sashes

Give Your Chair a Makeover: 10 Unique DIY Checkered & Gingham Chair Sash Ideas

After transferring the checkered motifs, fold each fabric strip in half lengthwise with printed sides together. Sew into a tube shape. Turn right side out, then slide onto chair backs and tie at the waistline. The custom plaid or checkered design will liven up any dining set!

Create Varied Patterns

Get creative with mixing and matching checkered prints! Print different sized checks onto alternating fabric strips for contrast. Or print the same pattern but vary the fabric colors underneath. Layer prints using sheer fabrics to combine multiple checkered looks in one sash.

Add Coordinating Embellishments

Consider accenting the printed checkered sashes with iron-on appliques, letters or motifs that complement the patterns. Florals, geometric shapes, monograms and more can be layered on for extra flair.

Make Matching Chair Cushions

Don’t stop at sashes! Extend your custom checkered patterns onto iron-on transfer cushions to cover the seats. Print checkerboard motifs sized to fit the chair dimensions. Or opt for a coordinating solid color or print that ties in with the sashes.

Try Different Transfer Techniques

Give Your Chair a Makeover: 10 Unique DIY Checkered & Gingham Chair Sash Ideas

Get creative with how you apply the iron-on transfers! Instead of all over prints, make stripes by pressing down strips of transfer paper. Play with angles and distressing the edges of the transfers for a deconstructed plaid effect.

With some digital check or plaid clip art, iron-on transfer paper and simple sewing skills, you can create designer-looking DIY checkered chair accents on a budget. Switch them out seasonally or whenever you crave a fresh decorating change. Your chairs will be runway-worthy yet uniquely your own!

Make Braided Gingham Sashes with Fabric Strips

Add a handcrafted touch to your dining chairs with beautiful braided gingham sashes. By interlacing fabric strips cut on the bias, you can create textured sashes with striking diagonal patterns to customize seating.

Braiding is an easy no-sew technique for DIY chair accents. And gingham check fabrics lend themselves perfectly to this tactile treatment. The classic checked motif forms graphic movement when strips are manipulated into neat plaits.

Ready to instantly elevate somedated chairs? Follow this guide to fashioning fabulous braided gingham sashes step-by-step.

Choosing Gingham Fabrics

Visit your local fabric store to select bright gingham prints in cheerful colors like red, yellow, green or blue. To show off the checks best, opt for medium to large scale plaids in crisp cottons or linens.

For extra visual interest, combine multiple different gingham patterns with contrasting check sizes and colorways. Mixing in solids or subtle ombres also adds depth.

Cutting Bias Fabric Strips

Cut strips lengthwise on the bias, at a 45 degree angle to the grain of the fabric. This allows the strips to stretch and move for easier braiding. Aim for 1-1.5 inch wide bias cuts.

If your fabric isn’t wide enough, carefully stitch strips together on the bias to achieve the desired lengths. Join colors in planned sequence for your sash pattern.

Estimating Yardage Needs

The number of fabric strips needed depends on the chair size and thickness of braids. For a standard dining chair, you’ll need about 5 yards total length. With 1-1.5 inch wide strips, plan on cutting and braiding together around 15 individual strips per sash.

Prepping Materials for Braiding

Give Your Chair a Makeover: 10 Unique DIY Checkered & Gingham Chair Sash Ideas

Set up your workspace. Lay out bias cut strips in order of use. Have tape or pins ready to secure strip ends. Optional supplies like beads, ribbons or threads can add ornamentation when braiding.

Tie one end of the first fabric strip to a fixed point, like a door handle. Keeping strips taut will make the braiding process easier.

Basic 3-Strand Braiding Technique

Begin with 3 strips, labeling them A, B and C. Cross A over B, then bring C through the center. Next cross B over C, and bring A through. Repeat, alternating which strip gets crossed over vs. threaded through.

Work slowly and keep even tension on the strands. Add in new strips when you run out of length by pinning or taping additional fabric to the ends.

Creating Multi-Strand Braids

For wider sashes, braid 5+ strips at a time. Follow the same over-under pattern, but cross 2 strands left over the center each time. Keep strip edges aligned neatly as you braid.

If desired, braid together multiple 3-strand braids, then braid those braids together for braided cables with more intricate dimension.

Incorporating Embellishments

Give Your Chair a Makeover: 10 Unique DIY Checkered & Gingham Chair Sash Ideas

Enhance your gingham braids by threading beads, ribbon or trims into the braiding pattern. Or add knots, tassels or pompoms at intervals along the braid for extra decoration.

Securing and Trimming Braided Ends

When the braid reaches desired length, remove from the fixed point and tie ends together. Trim any uneven edges. Sew or glue braid ends for durability.

Attaching Braided Gingham Sashes

Wrap the braided fabric sash around the chair back, centering on seat. Tie ends at front of waistline in a pretty bow or knot. Crisscross tails in back for a sleek finish.

If the braid feels too snug, temporarily pin it in place then carefully remove from chair and sew side seams to widen girth before final attachment.

Get those creative juices flowing! With some bias-cut gingham, braiding know-how and optional embellishments, you can craft chair sashes as unique as you are. Show off your DIY spirit with this simple yet eye-catching project.

Cut Checkered Paper and Adhere with Decoupage

For a quick and easy DIY checkered chair sash project, look no further than your papercraft supplies! With some patterned scrapbook paper, decoupage glue and sealant, you can transform the look of basic chairs in just a few hours.

Decoupage refers to an art technique where paper cutouts are affixed permanently to a surface using adhesive. The layered paper designs can cover furniture, walls, objects and more. It’s an accessible craft for beginners that yields impressive results.

Ready to decoupage dazzling checkered sashes to spruce up lackluster seating? Let’s explore how to make it happen.

Find Checkered Paper Patterns

Browse scrapbook paper, tissue paper, wrapping paper or wallpaper sample books to find checkered motifs you like. Look for graphic black and white checks, or opt for colorful ginghams or plaids in coordinating hues.

If you can’t find suitable checkered papers, consider hand-painting basic white tissue paper using stencils or stamps to create your own custom patterns.

Cut Paper Sections to Size

Give Your Chair a Makeover: 10 Unique DIY Checkered & Gingham Chair Sash Ideas

Measure the width of your chair back at the spot where you want the sash placed. Cut rectangular paper sections about 2 inches wider than this measurement to allow for overlap.

Cut paper strips long enough to wrap around the chair back with several inches of excess for tying ends at the waistline.

Apply Decoupage Glue

Cover the chair back surface where the paper sash will be adhered with a thin layer of decoupage glue or clear acrylic medium. Use a soft brush or foam applicator.

Next, coat the back of the paper strip with glue. Carefully smooth onto the chair, pressing out any air bubbles with a soft cloth.

Layer on Additional Paper

Brush another layer of decoupage glue over the paper strip as well as surrounding chair surface to seal edges. Smooth out wrinkles.

For extra durability, apply 2-3 additional checkered paper strips in the same way, completely overlapped and sealed with glue.

Trim Excess Paper

Once dry, use sharp scissors or a craft knife to neatly trim any overhanging paper at top and bottom edges. Round corners for safety.

Seal and Protect

Give Your Chair a Makeover: 10 Unique DIY Checkered & Gingham Chair Sash Ideas

Coat the paper sash generously with decoupage sealant or polyurethane. This waterproofs the design and creates a glossy finish. Allow to fully dry before using the chair.

Tie Off Ends Attractively

Finish by looping the loose paper sash ends around front of the chair at waist height. Tie together in a pretty bow or knot. Add decorative trim or ribbon for extra polish.

Create Coordinating Seat Cushions

Continue your checkered design by decoupaging coordinating paper onto plain seat cushions. Or leave the cushion as-is for an eclectic mismatched look.

Experiment with Different Patterns

Try combining various checkered prints on each chair for fun variety. Spice up solid chairs with just a pop of pattern on one or two seats.

Change it up seasonally by swapping in fresh decoupage sashes. The options for customization are endless!

With some simple papercrafting supplies and decoupage know-how, you can quickly makeover lackluster chairs. Let your creativity shine by crafting unique checkered sashes tailored to your personal style. Your dining space will go from blah to ta-da in no time!

Paint Gingham Checks Directly onto Wood Chairs

For a budget-friendly makeover that packs a punch, consider painting your own gingham check patterns directly onto wooden chair frames. With some painter’s tape, acrylic craft paint and a steady hand, you can give boring chairs personality in just an afternoon.

This easy DIY project skipsthe fussy fabrication of separate sashes and instead transforms the chair back itself into an oversized gingham accent. The graphic checks appearance tailored and crisp when neatly executed.

Ready to revamp lackluster seating with a custom painted checkerboard motif? Grab your brushes and follow these simple steps.

Prepare Chair Surface

Lightly sand wooden chair backs to rough up the surface so paint adheres well. Dust away any residue. Apply primer if desired, but not required.

Use painter’s tape to mask off any chair portions, like legs or seats, that you don’t want to paint. Drape drop cloths underneath.

Map Out Checkerboard Design

Determine the desired check size and start mapping the grid layout with painter’s tape. Place vertical strips spaced evenly across chair back, followed by horizontal strips.

For accuracy, measure and mark guidelines in pencil first. Apply the tape along pencil lines to create a grid pattern.

Choose Gingham Color Combination

Give Your Chair a Makeover: 10 Unique DIY Checkered & Gingham Chair Sash Ideas

Have fun selecting two or more paint colors that complement your room’s decor. For a traditional gingham look, opt for crisp black and white. Or go bright and cheery with primary colors like red, yellow and blue.

Consider alternating more than one color for rows or columns to create a more lively colorblocked plaid effect.

Neatly Paint In Checks

Use a small paintbrush to neatly fill in each taped off check with color. Work in careful strokes to avoid bleeding under the tape edges. Let sections fully dry before moving on.

For the crispest lines, remove tape immediately after painting each row or column prior to continuing.

Finish with Clear Sealer

Once paint is completely dry, use a wide brush to apply 1-2 protective clear coats over the entire chair back surface. This helps seal in the pattern and creates a smooth finish.

Consider Coordinating Chair Cushions

To pull the accent together, make simple cover cushions from scrap fabric in one of the painted gingham colors. Or use patterned fabric like actual gingham check or ticking stripes.

Creative Painting Variations

Give Your Chair a Makeover: 10 Unique DIY Checkered & Gingham Chair Sash Ideas

Change up the look with fun gingham painting techniques like dabbing on polka dots or using a colorwash effect. Paint just the top or bottom portion of the chair back for a unique detail.

Highlight the checks by edging them with metallic gold or silver paint pens. The options are limited only by your imagination!

With a simple taped off grid, acrylic craft paints and some patience, you can transform ordinary chairs into functional art pieces that deserve center stage. Show off your crafty skills by crafting hand-painted gingham sashes tailored to your personal taste and decor style.

Affix Grosgrain Ribbon for Quick Gingham Trim

For an easy DIY shortcut to checkered chair accents, look no further than the ribbon aisle! Preppy grosgrain ribbon with its distinctive gingham patterns provides and instant sash solution.

Grosgrain ribbon has a flat woven texture with a prominent crosswise rib. It comes in a rainbow of colors and an array of classic checks, stripes and plaids perfect for adorning furniture.

With just some simple grosgrain in coordinating hues, you can customize plain chairs with tailored gingham detail in no time. Here’s how to make it happen.

Selecting Grosgrain Ribbon

Browse fabric and craft stores to choose grosgrain ribbon options. Look for 1-1.5 inch wide sizes in black/white, red/white or blue/white traditional gingham checks.

For more vibrant flair, seek out bolder colored ginghams like lime green, coral pink or turquoise. Mix and match for a fun mismatched look.

Measuring Chair Dimensions

Determine how much ribbon you need by first measuring around the widest part of the chair back. Add about 12 extra inches to allow for ties at the waistline.

Standard dining chair width is 14-18 inches. With a 1.5 inch ribbon, you’ll need approximately 4-5 yards per chair sash.

Affixing Ribbon to Chairs

Use fabric glue or hot glue to firmly secure one end of the grosgrain ribbon to the center back of the chair at the top edge. Press down firmly.

Wrap ribbon around back of chair, pulling taut. Adhere end neatly overlapping the starting point. Allow glue to dry fully before using chair.

Finishing with Decorative Bow

Give Your Chair a Makeover: 10 Unique DIY Checkered & Gingham Chair Sash Ideas

To cover the glued section, wrap loose ribbon ends around to the chair front. Tie together in a pretty bow or knot at waist height. Fluff out bow loops for a feminine finish.

For extra flair, cut ribbon tails into decorative points or angles before tying the bow.

Incorporating Multiple Ribbons

Sew together grosgrain ribbons in alternating patterns down the chair back for a striped effect. Or affix them vertically like piping for a unique accent.

Layer contrasting gingham prints for added visual dimension. The options are endless!

Adding Supplemental Trims

Enhance your grosgrain sashes by supplementing with complementary ribbons like organdy or raffia. Ruffle trims also provide feminine flair.

Accent with decorative buttons, fabric flowers or pom pom trim glued at intervals over the gingham ribbon.

With just a few yards of grosgrain and some creativity, you can customize plain chairs with pretty gingham sashes in under an hour. Change them out seasonally for a fresh decorative touch!

Give Your Chair a Makeover: 10 Unique DIY Checkered & Gingham Chair Sash Ideas

Give Your Chair a Makeover: 10 Unique DIY Checkered & Gingham Chair Sash Ideas

Looking for a fun and easy way to spice up those plain folding chairs or church pew seats? Adding a pop of checkered or gingham pattern with a chair sash can instantly transform an ordinary chair into a stylish statement piece. With some basic sewing skills and inexpensive fabric, you can create your own custom chair sashes perfect for weddings, parties, holidays, and everyday use.

Checkered and gingham prints are classic patterns that will never go out of style. The checks and grids add eye-catching geometric interest, while the black and white or red and white color combos keep things classic. Chair sashes with these timeless prints can complement any event decor from rustic to modern. And the best part? Chair sashes are so simple to DIY even if your sewing skills are beginner level.

Supplies You’ll Need

To make your own chair sashes, you’ll need just a few supplies:

  • Fabric – Look for cotton, linen, or polyester fabric with checkered or gingham prints. About 1/2 yard is enough for one sash.
  • Ribbon – Contrasting grossgrain or satin ribbon, about 1-2″ wide. You’ll need ribbon equal to the length you want the ties to be, usually 12-18″.
  • Thread – All purpose thread that matches the main fabric color.
  • Sewing machine and basic sewing supplies like scissors, pins, needle, seam ripper, etc.
  • Iron and ironing board.

10 Creative Ways to Sew DIY Chair Sashes

From crisscrossed ties to extra wide sashes, get inspired by these 10 easy sewing projects for jazzing up chairs with checkered and gingham style:

Crisscrossing two strips of checkered fabric adds visual interest and a touch of whimsy. Simply cut two rectangles the length you want the ties, fold and iron the long edges under, then sew contrasting ribbon to each short end. Crisscross the strips across the chair back and tie at the sides.

Amp up the girly charm with a half bow sash. Cut a rectangle about 1.5x the chair width, fold down the top section to form a bow shape, and stitch in place. Attach contrasting ribbon ends to tie onto the chair. Use wired ribbon for extra volume and bounce.

Show your rustic flair with a bandana inspired sash. Cut a large square from checkered fabric, fold into a triangle, and stitch the raw edges. Wrap the triangle around the chair back, ties facing front, and secure with contrasting ribbon.

Add extra volume with a double layer of the same checkered print or mix patterns for contrast. Cut two rectangles the chair width, sew together along one long edge, then wrap around the chair and tie off. ThePossibilities

Make a statement with an oversized, exaggerated bow. Cut a wide rectangle 3x the chair width, gather the center section by stitching two rows and pulling the threads to form pleats. Tie off the pleated section with contrasting ribbon for a jumbo bow style.

A touch of lace instantly dresses up the look. Cut a rectangle the chair width, then sew lace along the bottom edge before wrapping the sash around the chair. Choose lace that matches or contrasts the checkered print.

Fringe trimming adds a fun, lively accent to checkered sashes. Cut strips along each short end of the sash rectangle to create the fringe. For extra movement, make the fringe longer in the center and taper down on the sides.

Soft, fluttering ruffles paired with crisp checks create beautiful contrast. Sew a ruffle strip along the bottom edge before wrapping the sash around the chair. Increase fullness by making the ruffle wider than the sash.

Accentuate the checks with solid color borders. Sew a contrasting fabric strip along each short end of the sash rectangle. Try coordinating colors like red and white or black and white.

Get two stylish looks in one with a reversible sash. Select two coordinating checkered fabrics and join together with right sides facing. When wrapped around a chair, it will show a different checkered look on each side.

The possibilities are endless when it comes to customizing checkered and gingham chair sashes to match your event theme and decor. Whether you prefer classic black and white, red and white barn chic, dainty florals, or bold modern geometrics, this simple DIY sewing project adds a big pop of style for very little cost or effort. So grab some fun checks or ginghams and get creative embellishing chairs!